新手上路
二星級會員
- 舊站積分
- 9
- 舊站發表文章數
- 424
|
發表於 2002-4-1 11:24:35
|
顯示全部樓層
Hi CKL,
Yes I read you post and quote from Cliff Watson:
" ”So these cards don't pass on the data bit for bit.”
Actually they do pass data bit for bit. However, the arrival time at the decoder may not always be at the same interval due to jitter. "
I'm using c-media 8738 chip sending s/pdif through a 75-ohm coxial cable to Denon 1801-N (water good imported from Japan. -N means made for Japan market and I do not know if the decoder/DAC any better or worse.) The setup works well I guess because my un-trained ears hear no hickup from DD/DTS soundtracks. Sound field/positioning is good but again, I am no audio fan.
My guess is that a software dvd player and a sound chip that do not mess the raw DD/DTS data and a de-jitter device before decoder shall give you state-of-art sound in s/pdif domain.
On the other hand, some AVS members claimed that s/pdif is not an error-free protocol, thus the best deal is using PowerDVD audio filter that decodes the DD/DTS into wav format in digital, and then using professional DSPs/DACs employed by sound card makers like M-Audio for 5.1/7.1 ANALOG outputs to your power amps for best sound. It remains a dream to me so far.
I am no fan and previous s/pdif had met my need in DVD audio for now.
As verifying a DVD-ROM read accuracy, I would assume it's a different story and the audio CD experiment remains its validity to CD-R only. The DVD-ROM density is 7 times higher and vob files are compressed video and audio and being multiplexed that has to be CRC corrected when retrieving (a huge difference than Audio CD). If you were able to watch films smoothly in video and audio, everything is right in your HTPC.
My 2-cent. Thanks for tolerating.
Best,
Daniel Peng |
|