忘記密碼
 立即註冊
查看: 6169|回覆: 13

家庭劇院的音量!

  [複製鏈接]

148

主題

6276

回帖

0

積分

新手上路

五星級會員

舊站積分
567
舊站發表文章數
5403
 樓主| 發表於 2001-9-23 16:59:47 | 顯示全部樓層

家庭劇院的音量!

近來有不少朋友買了噪音計,
在與大家聯絡交談中也一直談到音量該如何調整,
由於手頭上一直沒有正式的資料可以佐證所以很傷腦筋!
目前有噪音計的朋友大概就只能做到五個喇叭的音量均衡,
對於重低音音量的調整目前還是沒有一個參考音量!
重低音的音量調整可能還是要由各位自己衡量,
但是拿重低音和噪音計來配合作駐波的尋找倒是蠻有用的!
這時用C加權可能會比較適合!
下午抽空找了一些資料或章鴾j家有幫助:
下面幾項節錄自http://www.dolby.com/tech/co.br.0103.DDFAQ.html

16. Should I use bipolar, dipolar, or tripolar surround speakers?
我該用bipolar, dipolar, 或是三面發聲的tripolar 作環繞喇叭?
Surround speaker placement, room acoustics, and personal preference are as important as the speakers?radiating characteristic. These factors vary greatly, so Dolby Laboratories cannot recommend a particular speaker for home theater use.

Bipolar, dipolar, and tripolar surround speakers use speaker drivers aimed towards the front and back of the room to achieve a diffuse soundfield like that created by the multiple surround speakers used in movie theaters. Your rooms acoustics will effect these designs more than conventional direct-radiating speakers, which, when placed properly, can also make effective surround speakers.

19. Why does my Dolby Digital decoder provide time delays?
為何我的杜比數位解碼時間延遲
Because the surround speakers in a home theater system are usually closer to viewers than the front speakers, both Dolby Digital and Dolby Surround Pro Logic playback require a split-second electronic delay of the surround channels.

In the case of Dolby Digital, the delay ensures that the viewer hears sound from the surround and front speakers simultaneously. For Dolby Surround Pro Logic, which has less inherent channel separation than Dolby Digital, a slightly longer (by 15 milliseconds) delay ensures that sound from the surrounds arrives just after sound from the front. This delay reduces the audibility of sound leakage from the front to the surround speakers.

Some Dolby Digital decoder units also provide an adjustable center-channel delay to ensure that the viewer hears sound from all three front speakers simultaneously.

20. How to I set the surround time delays?
我要如何設定環繞的延遲時間? (JASON LIN兄這個你好像有問到)  
The time delays in your Dolby Digital decoder are preset to provide good results in most home theater installations. If you wish to fine-tune the adjustments, consult the decoders instruction manual.

Most units allow you to adjust the surround delay in either the Dolby Digital or Dolby Surround Pro Logic mode. Because the relationship between the two delays is fixed, you only need to set the delay in one mode. The decoder will automatically provide the appropriate delay whenever you switch to the other mode.

To establish the proper surround delays for your system, you need to know the distances between your viewing position and a front speaker (A) and a surround speaker (B) as shown in Figure 20-1. Then, using Figure 20-2 (Dolby Pro Logic mode) or Figure 20-3 (Dolby Digital mode), find the distance to the surround speaker on the graphs vertical axis, and the distance to the front speaker on the horizontal axis. Lines drawn from these points will intersect on the graph at the recommended delay setting.

21. How do I set the center channel time delay?
我要如何設定中至喇叭和左右聲道的延遲時間?
You need no center delay (set it at "0") if your seating area is small with a few viewers at any time, and if you can place the three front speakers equidistant from it as shown in Figure 21-1. If the center speaker must be placed more in line with the left and right speakers as shown in Figure 21-2, thereby bringing it closer to the viewers than the left and right speakers, add 1 ms of delay for each foot it is closer. For example, if dimension C in Figure 21-2 is one foot less than L or R, set the time delay to 1 ms.

If your seating area is wide, with several viewers in a row as in a movie theater, its best to place the left, right, and center speakers all in line as shown in Figure 21-3 and use no center time delay.

Finally, if it is necessary to place the center speaker further back than the left and right speakers (not illustrated), select "? ms" (for a one foot difference) delay or "? ms" (two feet) delay, if these options are provided. If they are not provided, use "0" delay.

22. What is the "Midnight Mode" on my new Dolby Digital A/V receiver?
如何在我的杜比AV接收機上設定深夜模式?
(想知道如何決定總音量大小的必看)  
Dolby Digital soundtracks can have a very wide dynamic range between soft and loud sounds. At a full playback level, this can be thrilling, providing a truly theatrical experience, particularly for movies.

Late at night, however, the loud sound effects on movie soundtracks might not be appreciated by your family or neighbors. But if you turn down the volume to "keep the peace," the dialogue will be hard to hear, and subtle low-level effects may get lost altogether.

What youd really like to do is turn down the volume on just the loud effects, turn up the volume on quiet sounds, and keep the dialogue at the same level. This is what a Dolby Digital feature called Dynamic Range Control does. For lower-level listening, it applies dynamic range compression that preserves low-level sounds, prevents dramatic passages from getting too loud, and keeps dialogue intelligible. To help explain its function, manufacturers of Dolby Digital decoders have come up with names like "Midnight Mode" for this feature. See Figure 22-1.

The amount of compression is not arbitrary, but is decided in advance by the soundtracks producers, and coded right onto the soundtrack. For example, if theres a loud sound coming from the left surround thats meant to startle the audience, the soundtrack mixers might indicate less compression for that sound than other loud sounds when the Midnight Mode is switched on.

Some Dolby Digital decoders let you select various amounts of the available compression (e.g., 50%, 75%, 100%), while others provide only 100% when the compression mode is selected.

由於網頁用JAVA寫的除了圖片還有解說,只有圖片時怕會看不懂請自行前去觀看!

以下是提到C-L(R)-S的參考音量差!http://www.dolby.com/tech/whtppr.html
2.1. Concept of Active DecodingDirectional Enhancement

Passive decoders, as noted earlier, use a simple differential stage to extract the surround signal from the left and right input signals. The decoders maintain high channel separation across the front, but localization is proper only within the particular seating area where a phantom-center image is effective. Furthermore, even with the effects of surround channel processing, it is not possible to obtain a total degree of isolation from front to back since the surround speakers reproduce any difference information in the Lt/Rt composite. It is due to these factors that passive decoders are limited in their ability to place sounds with ultimate precision for all viewing positions.

Directional enhancement is a term referring to any technique that attempts to remove the effects of the matrix system crosstalk by manipulating the output signals of the decoder. Its goal is to create sharply focused sound images and to recreate directional cues covering a wide listening area. An active decoder can most easily be thought of as a passive decoder followed by an enhancement circuit. To illustrate the concept, we will first describe the simplest technique for directional enhancementgain riding. Fig. 6 shows how the gain of each output is varied with a voltage-controlled amplifier (VCA).

Consider the case where a single sounddialogueis present in the center channel (Lt=Rt). The passive decoding map in Fig. 4 shows that the center output will carry the dialogue, but so will the left and right outputs only 3 dB down. With control circuits, the decoder can decide to eliminate the unwanted dialogue leakage by turning down the gain of the left and right speakers, leaving only the desired center output audible. The same procedure may also be used to isolate the left channel output by turning down the center and surround outputs when only an Lt input signal is present. In fact, for an input signal encoded at any position in the 360-degree circle, the separation can be completely restored with this simple method to equal that of a discrete four channel system.
Fig. 6

Fig. 4


148

主題

6276

回帖

0

積分

新手上路

五星級會員

舊站積分
567
舊站發表文章數
5403
 樓主| 發表於 2001-9-23 17:17:47 | 顯示全部樓層
在下面的PDF檔中討論到了電影院中的音量設定在85dBC是不是太大聲?
這是目前我所找到較正式有提到劇院音量設定值的!
但是這個值只建議當作是播放時的最大值,
因為長時間持續保持在這音量環境中將造成身心受傷害聽力受損!
最重要的是除非你沒有鄰居或是你的空間有特別處理,
不然你經常這樣很快就會收到破懷環境安寧噪音太大的罰單!
http://www.dolby.com/tech/toolouds.pdf

在下面這個PDF檔提到了關於空間各頻率音量大小的參考數據!
http://www.dolby.com/tech/l.ml.9811.surmix.s.pdf
150立方米以上空建請參考4.3.1
150立方米以下空建請參考4.3.2

845

主題

5875

回帖

0

積分

新手上路

五星級會員

舊站積分
138
舊站發表文章數
5982
發表於 2001-9-23 20:06:22 | 顯示全部樓層
這塊"雜訊"真的蠻複雜的!.....


-------------------------
劍是虛名,李慕白是虛名,AV也是虛名...!..?...

148

主題

6276

回帖

0

積分

新手上路

五星級會員

舊站積分
567
舊站發表文章數
5403
 樓主| 發表於 2001-9-23 22:44:43 | 顯示全部樓層
ㄟ其實是可以很簡單的,若是我自己的話:
1.抓出現在的各聲道音量大小
2.將五聲道的音量調整到均衡
3.比較兩者的感覺差異
4.微調
至於重低音的話除了分頻點以外我大概不會調特別的東西了,
換換礎鴔鴔儩n波選個影響較小的位置音量大小別把我嚇到就好!
由於每個空間不見得都是完整的獨立空間,
所以一些微調和個人感覺還是很重要!
不過說真的我也很好奇Chousir如何用avia抓到重低音反相的問題!
不知是否能請Chousir看到這篇時教導一下!

4

主題

46

回帖

0

積分

新手上路

一星級會員

舊站積分
0
舊站發表文章數
56
發表於 2001-9-24 00:05:53 | 顯示全部樓層
哇塞/全是英文,它不認識我,我對它也很陌生,那位好心人士翻譯一下吧/如無人效勞中秋節後,我請小犬翻一翻再貼給各位參考

Philip 該用戶已被刪除
發表於 2001-9-24 02:34:23 | 顯示全部樓層

358

主題

1萬

回帖

50

積分

新手上路

打屁會員

舊站積分
180
舊站發表文章數
10718
發表於 2001-9-24 08:30:48 | 顯示全部樓層
哇塞/全是英文,它不認識我,我對它也很陌生,那位好心人士翻譯一下吧/如無人效勞中秋節後,我請小犬翻一翻再貼給各位參考


有時候想想恨自己還真是不長進.全都是ABCD就算看的懂幾個單字
全部湊在一起時還真是看不懂.希望有心人士能夠造福一下人群.
幫大夥翻譯一下.我想大家會感激你的

148

主題

6276

回帖

0

積分

新手上路

五星級會員

舊站積分
567
舊站發表文章數
5403
 樓主| 發表於 2001-9-25 17:16:52 | 顯示全部樓層
20. How to I set the surround time delays?
我要如何設定環繞的延遲時間?  (JASON LIN兄這個你好像有問到)
Figure 20-2

Figure 20-2


44

主題

368

回帖

0

積分

新手上路

二星級會員

舊站積分
0
舊站發表文章數
411
發表於 2001-9-25 18:38:50 | 顯示全部樓層
16.我該用bipolar, dipolar, 或是三面發聲的tripolar 作環繞喇叭?
環繞喇叭的礎, 室內聽覺效果, 和個人偏好如同其他聲道一樣重要? 它的發聲特性導致很大的變數, 所以杜比實驗室並不建議在家庭劇院使用特定喇叭.

Bipolar, Dipolar, 和 Tripolar 等環繞喇叭使用正對前方的喇叭單體來擴散音場達到像電影院般多喇叭的效果. 這些設計比一般單向發聲喇叭更加影響你的室內聽覺效果, 如果礎鴠蕭T環繞喇叭將更有效率.

19.為何我的杜比數位解碼時間延遲?
因為在家庭劇院中環繞喇叭通常比前置喇叭更接近使用者, 播放Dolby Digital 和Dolby Surround Pro Logic 需要一個環繞聲道的分秒電子延遲.

在Dolby Digital 的情況下, 這個延遲確定使用者能同時間聽到前置和環繞喇叭的聲音. Dolby Surround Pro Logic 由於它固有的聲道分離設計少於Dolby Digital , 因此有稍長的延遲(15毫秒)來確定環繞聲在前置聲到達後才到達. 此延遲可降低前置到環繞喇叭可聽到的洩音.

有些Dolby Digital 解碼裝置也提供中置聲道的調整確定使用者可同時聽到前方三個喇叭的聲音.

20.我要如何設定環繞的延遲時間?
一般的Dolby Digital 解碼器已經預設了時間延遲使家庭劇院達到好的效果. 如果你需要更進一步的微調則參考解碼器的使用手冊.

大部分的裝置都提供Dolby Digital 或Dolby Surround Pro Logic 模式等環繞延遲的調整. 因為兩者的延遲關係都是固定的, 因此你只需要設定其中一種模式的延遲, 當你切換另一種模式時解碼器將自動提供正確的延遲.

要設定正確的環繞延遲, 你需要知道視聽位置與前置喇叭(A)和環繞喇叭(B)的距離如圖20-1. 再用圖20-2(Dolby Pro Logic模式) 或圖20-3(Dolby Digital模式), 在縱座標找出環繞喇叭的距離, 橫座標找出前置喇叭的距離. 交會的線則是建議的延遲設定.

21.我要如何設定中至喇叭和左右聲道的延遲時間?
如果你的座位較小或視聽者不多中聲道是不需要延遲的, 如果可以把你的三個前置喇叭礎巡扒Z離如圖21-1, 如果中置喇叭需要偏左或右則把它穡鴗韖炙k聲道更靠近視聽者的地方, 每靠近1英呎加1毫秒的延遲. 舉例, 如果C位置如圖21-2比左右聲道少1英呎則延遲為1毫秒.

如果你的座位像電影院般較寬, 最好把左, 右, 中置喇叭礎赤蝸u如圖21-3且不設延遲.

最後如果要把中置喇叭礎雈炙k喇叭後面, 選擇"?毫秒"(如差1英呎)延遲或"?毫秒"(2英呎)延遲如果這些選項提供. 如無法提供則用"0"延遲.

22.如何在我的杜比AV接收機上設定深夜模式?
Dolby Digital 音軌在軟性聲音和大音量有非常寬的動態範圍. 全音量的播放將非常震撼提供真實的電影劇院效果.

在夜晚大音量的電影可能影響到家人或鄰居, 但如果把音量降低則對話將不易聽清楚.

Dolby Digital 有一項弁觸ynamic Range Control 可以做到降低大音量的音效, 提高低音量的細節音效且保持對話在同音量. 這種低音量收聽它用動態範圍壓縮維持低音量音效並防止劇情中的大動態音效且保持對話的清悉. 此弁鄏bDolby Digital 解碼器製造商通常取類似"Midnight Mode"的弁.如圖22-1.

其壓縮量並不固定而是取決於音軌製造商的壓片作業. 如果Midnight Mode開啟時比如一個大音量的音效從左環繞發出來震撼觀眾則音軌混音器會用比其他大音量音效更低的壓縮.

選擇壓縮模式有些Dolby Digital 解碼器可以選擇多種壓縮量(如: 50%, 75%, 100%), 其他只提供 100%.


先前所提的被動式解碼器使用一種簡易不同的階段來截取從左右輸入訊號的環繞訊號. 從前置起, 解碼器維持高度的聲道分離, 但因此效果局限於一個特定的座位. 當環繞喇叭產生任何異於Lt/Rt混合的資料時即使環繞聲道效果的作用仍無法得到從前置到後置的完全獨立. 這些因素導致被動式解碼器在有限的能力之下無法精準的發聲至所有座位.

向性增進是任何一種技術其嘗試移除並再處理交流於母系統和解碼器間的效果. 其目的是在寬敞的視聽空間產生精確的聲音定位. 一個動態解碼器很容易被想像成一個附加增進迴路的被動式解碼器. 說明此概念我們先解釋向性增進最簡單的技術. 如圖6 指出一個電壓控制擴大器如何獲得輸出的變化.

在單純對話聲的中置聲道(Lt=Rt)的情況下, 被動式解碼如圖4指出中置輸出除了對話之外還輸出比左右少3dB 的輸出. 降低左右喇叭的增益, 解碼器的控制迴路可以決定消除不必要的對話洩音, 只保留中置的輸出. 如此相同的程序, 當Lt輸入訊號存在時降低中置及環繞輸出也可應用在獨立左聲道的輸出. 事實上在360度任何一位置的輸入訊號編碼, 這種簡易的方式相當於一個分離式的四聲道系統其分離可完全回復.


有些專有名詞的翻譯不曉得正不正確, 請各位指教 []

panasync

99

主題

7373

回帖

0

積分

新手上路

五星級會員

舊站積分
2176
舊站發表文章數
5172
發表於 2001-9-25 18:57:35 | 顯示全部樓層
panasync兄
謝謝你辛苦了

您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-21 03:17 , Processed in 0.043614 second(s), 39 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表