忘記密碼
 立即註冊
查看: 6254|回覆: 41

Peter Caesar P4 3.5GHz 狂飆 FFDShow!

  [複製鏈接]

30

主題

397

回帖

0

積分

新手上路

二星級會員

舊站積分
9
舊站發表文章數
424
發表於 2004-6-29 21:02:40 | 顯示全部樓層 |閱讀模式
各位好﹕

一向以來讀 Peter Caesar 老兄文章,覺得啊,切中核心已屬上品,其中蘊藏的幽默更是得來不易之消暑妙方,中文造詣之高,令在下十二萬分感佩。日前不揣淺陋,毛遂自薦願無條件為其組裝一臺 HTPC,沒想到這魚鉤、魚線還沒碰到水,大魚就上鉤、大船就入港了。暝r

閒話休提,這次獵得的主要零組件如下﹕

P4 2.8CG Northwood SL6Z5 Costa Rica 封裝,上品!看中它最適合配 DDR500,也就是外頻跑 250MHz x 14 倍 = 3.5GHz。$6,350。
CoolerMaster Hyper 6 頂級散熱管加風扇,$1,800。
Abit IC7-G $5,300。須訂貨隔天才有,若有 IC7 or IC7 Max III 也可以,看中它是 Intel 875 及良好的 pci 電源。
G. Skill 芝奇 DDR500 256MB x 2 跑雙通道加上 250MHz 外頻,是 FFDShow 的最愛!$1,850 x 2 = $3,700。
AOpen 靜音電源 400W,$2,000
金河田機殼拆掉電源 $1,400
Hitachi 7K250 160GB/8M cache,三年保固 $3,350,7200rpm 叫我第一名!
Pioneer 120S 吸入式 DVD-ROM,$1,300。
ELSA 960FX $3,850。

開機後,先在 BIOS 裡把 AGP/PCI 頻率固定在 66/33MHz,然後加外頻到 250MHz,再依芝奇建議把 DDR DRAM 電壓設 2.8V,嘿!開機過 POST 成功並要求可開機碟,於是灌 XP 約十一分鐘即完成,再依序把 sp1 及週邊驅動程式安裝完畢,系統資訊已看到 3.51 GHz!

用 3DMark 2001 跑廿個測試皆過關。試播 ZoomPlayer + WinDVD Video + PowerDVD Audio + FFDShow spline or lanczos 1024x768 完整無誤!

99

主題

7373

回帖

0

積分

新手上路

五星級會員

舊站積分
2176
舊站發表文章數
5172
發表於 2004-6-29 21:23:43 | 顯示全部樓層
無敵的狗大......你不是無敵了[]

321

主題

2萬

回帖

0

積分

新手上路

外星寶寶

舊站積分
5673
舊站發表文章數
19543
發表於 2004-6-29 21:36:52 | 顯示全部樓層
可惡的傢伙.....好在他沒跑1920X1080.....因為單槍要跑配合他的真實解析度...1024X768...比較清晰

3.5G才跑1024.....

哈哈..我不怕...有種跑1920X1080....1080P給我看....







不要逼我換CPU....嗚....

37

主題

1940

回帖

0

積分

新手上路

Digital = Simplicity

舊站積分
30
舊站發表文章數
1976
發表於 2004-6-30 03:04:02 | 顯示全部樓層

彭太公釣魚, 離水30浬 --- 釣到台北來?

原發表者是 彭道堯
[B]

........沒想到這魚鉤、魚線還沒碰到水,大魚就上鉤、大船就入港了。暝r

............試播 ZoomPlayer + WinDVD Video + PowerDVD Audio + FFDShow spline or lanczos 1024x768 完整無誤! [/B]


彭sir 客氣了, 想來我才是佔盡便宜的一方;
據我在 AVSforum 上看的報價, 軟硬體加調整,
少則 US$2K, 多則3K 才能搞定!

錢是一回事, 得 彭兄 這般"聞絃而知雅益"的高手折節下交,
這份情誼又當是另一番可傳頌子孫的人生紀遇, MyAV 奇遇.
不知各位是否相信, 早上十點左右, 我才與彭兄議定硬體規格;
飯後正考量著要否打電話給 彭兄關心一下進度, 會不會顯得猴急模樣?
怎麼上網一看, 統統搞定!
彭兄在 HTPC 硬體 與 FFDShow + ZoomPlayer + WinDVD + ............
浸淫之深實是難以思議, 彷彿打開 彭兄 的頭蓋骨就可以看到 VLSI 線路,
Function Chart?  

如今被 doggy 嗆聲 1080p, 礙於手頭不便, 組不起 64-bit HTPC,
倒也無從辯駁; 但是因為我這窮人的原罪, 以致累及 彭兄 英名, 佔不到版主一缺, 真是孰可忍孰不可忍;
就還是忍了吧, 彭兄日前言及:
"以64-bit 的硬體架構, 作業系統, 應用軟體,......., 與其現在投入,
不如明年 3rd Qt; 更何況你的口袋又沒有 doggy 來的深, 人又退休了,
(X鳥比雞腿 ---- 這不文的一句是我在腦子裡加的), 1080p 的 projector
在 MyAV 也只能讓 doggy 這般風流人物狗首是瞻榮登版主, ............
我們在一旁等著幫 狗大 抬轎就好了; 這般高尚的風標我們是耍不來的...."
彭sir 的風度當真是好, 給我拖累了, 也給咬了, 還要顧全我的顏面![)] [)]

我又想了想, 彭sir 真的是高啊;
這狗大必然是要嗆聲的, 只要他一嗆聲,
以狗大的 1080p 無敵三槍, 64-bit HTPC, 七情六慾.......
政通人和, 德高望重, 這版主一職正好對號入座, 捨 doggy 其誰?

恭喜狗大, 賀喜狗大, 而今而後, 顯示器材版上, 唯狗是尊.[] [] []
對呀, 對, 這就去請示站長, 公推狗大榮任版主, 必定全體鼓掌通過 ----
MyAV 幸甚, 國家幸甚!
BLACK @Level 16, WHITE @Level 235

30

主題

397

回帖

0

積分

新手上路

二星級會員

舊站積分
9
舊站發表文章數
424
 樓主| 發表於 2004-6-30 07:00:10 | 顯示全部樓層
Quoted by Owen – FFDShow Originator:

「I don』t know if it has been conclusively proved that a P4 is better then Athlon 64 for FFDShow use but there is evidence that a good P4 system will outperform any Athon XP.
I believe that a P4 2.8C Northwood on an Intel 865 or 875 main board with good quality dual channel RAM that can run at up to 250Mhz (PC4000,DDR500) set at 1:1 memory to FSB timing is the best performing system currently available.
Almost all Northwood chips will run at 3.2-3.5Gig with standard cooling. The 2.8 was chosen because it gives the best combination of CPU speed and FSB/RAM speed when overclocked.
My system is running with near the best possible CPU-FSB-RAM combination of 3.5Gig CPU, 1Gig FSB, 250Mhz RAM with RAM synchronized to the FSB (1:1).
Although it is possible to find a CPU that would go higher, and a main board that will run the RAM above 250Mhz it is unlikely.」

Quoted by vpopovic:

「only FX AMD family supports dual chanel RAM…」
「Based on Owen's input, his 3.5 P4 and my 2.4 FX-51 run provide almost identical performance with FFDShow. We also run RAM at about the same speed (Owen 250, me 240, although the way RAM is handeled by our systems is different). Otherwise, our systems are quite different, mine being without FSB (hypertransport), having on-die memory controler, and much larger L-2 cache, while on clock-per-clock basis I run about 1/3 slower, and of course FX-51 is way much more expensive than P4 2.8. I will read the thread again tomorrow to compare my results to other AMD chips and try to summarize what seems to be the issue. My preliminary conclusion is that FFDShow runs better on P4s than on AMDs. It would be interesting to see how it performs on P4 3.4EE, of course overclocked.」

「I think it is more than clear that dollar for dollar P4s do way better with FFDShow in current setups. Now, if FFDShow ever gets optimized for 64-bit systems...」

By Owen again:

「Ok, I did some re testing on my system to confirm what it can run smoothly and without tearing.
I can use WinDVD5 or Elecard decoder with Denoise3d followed by Resize (Lanczos) 1920x1080 with VMR9 or Overlay.
I can also use WinDVD5 or Elecard decoder with Denoise3d followed by Resize (Spline) 1776x1000 with VMR9 or Overlay.」

「I suspect that the excellent performance I am getting with FFDShow is not just due to the P4 running at 3.5Gig but also to the very high memory bandwidth of my system.
Dual channel DDR500 running at 250Mhz (2.5,3,3,7) quad clocked to 1Gig FSB with 1:1 divider is definitely a strong contributing factor.
P4 CPU』s and video processing are both known to thrive on memory bandwidth.
I noticed a definite improvement in performance when I changed from single channel RAM to a dual channel system.」

「Compared to a good Athlon 64 system the Intel is at least as fast or FASTER for FFDShow use and is CHEAPER as well.」

By taoshen:

「… The most important thing for encoding video is memory bandwidth. The next important thing is clock speed. If you look at the memory bandwidth tests for even athlon64s, they are at about 70% of the P4 800FSB. Only AthlonFX with their dual channel DDR controller can compete, but they cost too much.」

By Owen again:

「…There are experienced FFDShow users running overclocked Athlon FX systems that can not outperform a much cheaper P4 system.」

By Goi:

「Anyway, running memory in pairs is mainly to increase memory bandwidth, IF your system supports dual channel memory. No A64 currently supports this other than the FX series.」

不好意思又轉貼英文。結論是﹕以 FFDShow 的使用來說,單通道的 AMD Athlon64 不是 P4 3.5GHz 的對手,換上伺服器等級/雙通道的 AMD 64-bit FX-53/51 才勉強平手,所以 Peter Caesar 的 HTPC 短期內是坐穩霸主的。
附帶一提的是,昨天趕去接女兒前試 3.64GHz 不行,試 3.57GHz 跑 3DMark 2001 是 OK 的。

37

主題

1940

回帖

0

積分

新手上路

Digital = Simplicity

舊站積分
30
舊站發表文章數
1976
發表於 2004-6-30 08:19:24 | 顯示全部樓層
原發表者是 彭道堯
[B]

....結論是﹕以 FFDShow 的使用來說,單通道的 AMD Athlon64 不是 P4 3.5GHz 的對手,換上伺服器等級/雙通道的 AMD 64-bit FX-53/51 才勉強平手,所以 Peter Caesar 的 HTPC 短期內是坐穩霸主的。
附帶一提的是,昨天趕去接女兒前試 3.64GHz 不行,試 3.57GHz 跑 3DMark 2001 是 OK 的。 [/B]


拜 彭sir 的功力, 我這個 PC idiot 竟然莫名其妙就黃袍加身啦!

這個武林霸主的名份來得可算僥倖, 心中難免墬墬不安 --- 懷璧之罪;
不知隱身殺手是誰, 會由何處, 在何時, ......., 給我喀ㄔ一刀.
說到這兒, 可要拜託狗大趕快升級 CUP, Dual channel M/B 加 Server/workstation 的 WindowXP 以解我的窘境;
武林霸主的盛名就還是讓給狗大吧,
瞧這跟"神威鏢局"的金字招牌多麼配啊.
(我這個人從小沒上過檯面, 有些手足無措)[:I] [:I] [:I]

彭大, 真沒想到三兩下您就搞定了!
多玩個幾天吧, vinjou 大剛好又寄了 MPEG2 TS DVD-R 給你,
您就通通都玩個夠吧.
BLACK @Level 16, WHITE @Level 235

321

主題

2萬

回帖

0

積分

新手上路

外星寶寶

舊站積分
5673
舊站發表文章數
19543
發表於 2004-6-30 11:52:08 | 顯示全部樓層
Peter Caesar老頑童實在利害....竟然請的動天下無敵中神通王重陽親自出馬.....害我的HTPC無處施展....

眼看這下寶座不保.....還是乖乖的回家施工新的視聽室吧.....

此仇不報非君子.....我還有老廖.....軟體比不過中神通獨門的內功心法....就靠硬體的更新決勝負啦.....蛤蟆功硬拚老頑童的雙手互搏.......精采可期.....衝衝衝....

38

主題

2001

回帖

0

積分

新手上路

四星級會員

舊站積分
47
舊站發表文章數
1820
發表於 2004-7-1 15:58:10 | 顯示全部樓層
恭喜Peter, 賀喜Peter,

這下子身懷倚天劍這個神兵利器,
可真的是讓天下無敵的狗兄屠龍刀悶~了一下.

只是不知道Peter 兄要怎樣把它帶回家,
告訴嫂子您已經是天下第一了.[]

37

主題

1940

回帖

0

積分

新手上路

Digital = Simplicity

舊站積分
30
舊站發表文章數
1976
發表於 2004-7-1 16:45:57 | 顯示全部樓層
原發表者是 Jeffhsutw
[B]

只是不知道Peter 兄要怎樣把它帶回家,
告訴嫂子.................[] [/B]


1. 先把現有 PIII 的電源接觸不良;
2. 在把 Monitor 的 Brightness, Contrast,.... 調亂掉;
3. 塞一堆龐大沒用的 Image file,....................;
4. 讓她沒辦法 KuRu/Down load 排行新歌, 燒不了 CD-r;
5. ....................

最後跟她說 PC 掛了, 而且老舊不堪維修, 找不到零件,.....
為了老婆的快樂, 我在 EBay 花 NT$9k 標得一台二手 PC.
當然, 二手 PC 買回來後,
舊 PIII 奇蹟似的由垂死絕症中自療復活,
快樂的繼續它的上網工作~[] [] [] []

這樣說會被拆穿嗎[)] [)] [)]
------ PTT 會長跟副會長的陰謀?
BLACK @Level 16, WHITE @Level 235

25

主題

226

回帖

0

積分

新手上路

二星級會員

舊站積分
22
舊站發表文章數
219
發表於 2004-7-1 18:28:37 | 顯示全部樓層
請問彭兄,
不知以Peter老兄的目前天王級配件是否已有能力直接以DVD-ROM配zoom player+ffdshow順暢播放
(並搭配您以前在FFDshow how to這篇文裡的參數)
免掉把影片rip到pc的步驟~??

若可,是否可以試到1280x720 仍能順暢嗎?? 疑惑中.

ps.很好奇Hyper6噪音表現如何?

您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-19 11:04 , Processed in 0.138995 second(s), 42 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表