忘記密碼
 立即註冊
查看: 1169|回覆: 14

sony dvp9000es + sony dz950 倍頻選擇

  [複製鏈接]

2

主題

14

回帖

0

積分

新手上路

初級會員

舊站積分
0
舊站發表文章數
15
發表於 2001-10-28 23:09:37 | 顯示全部樓層

sony dvp9000es + sony dz950 倍頻選擇

大家好:
最近使用 9000es 之 progressive 輸出接到 950 之 component 輸入
發覺於 dvd title 之 select menu 靜止 or interactive 畫面皆會有閃爍之情況.
但是若使用 9000es 之 interlace 輸出接到 950 之 component 輸入
再 enable 950 之 drc progressive 則無閃爍情況,
而撥放電影時可能眼睛太爛了, 看不出二者有何差異.
由於手上還有一部 iscan pro 可做 progressive 輸出,
想請教各位前輩, 理論上 iscan pro 之倍頻 > 9000es 之倍頻 ? 950 之倍頻
何種組合為佳?
1. 9000es interlace + iscan pro + 950
2. 9000es interlace + 950 drc progressive
3. 9000es progressive + 950
請各位給予建議, 謝謝!

570

主題

5276

回帖

70

積分

新手上路

努力看事情光明面的Tom

舊站積分
1645
舊站發表文章數
5159
 樓主| 發表於 2001-10-28 23:16:06 | 顯示全部樓層
也有可能
是你銳利度調的稍高一點,才會有此現象

(DVD請先調回DEFAULT  (GAMMA除外)電視機的請用VEDIO ESSIONTALS
調整一下)
而iscan pro 倍頻後剛好幫你霧化一點
才會有此差別!

...............................

最近公事繁忙
暫時閉關修養
目前使用的器材和心得(gundam奮鬥之路)
http://pub31.ezboard.com/favlife ... e?topicID=201.topic


被 gundam重新編輯於10/28/2001  23:21:28

2

主題

14

回帖

0

積分

新手上路

初級會員

舊站積分
0
舊站發表文章數
15
發表於 2001-10-28 23:50:28 | 顯示全部樓層
謝謝 gundam 兄的答覆!
可是我已經用 video essential 調整過了耶,
而且我把 sharp 設到最小也是一樣喔, 我剛剛
又把 video essential 拿出來看了一下, 就
連 video essential 的字幕也稍稍會閃爍喔,
但是用 drc 就不會了, 難不成 9000es 的倍頻
比 950 差嗎?

6

主題

64

回帖

0

積分

新手上路

一星級會員

舊站積分
0
舊站發表文章數
77
發表於 2001-10-29 00:14:04 | 顯示全部樓層
我也正好有此問題要問耶,
沒想到就有人提出了..
不過小弟的配備不能跟大家比,
只是普騰 29pm1 + panasonic RP-91 + ups 的超值色差線
在 Progressive Scan 模式時, 某些片子選單畫面也是閃爍得很嚴重..
反而在 480i 時不會..

舉個例子好了, 像 Eagles 那片在 song index 選擇的地方,
那條紅色光棒便可明顯看出其有閃爍抖動現象..
到底為什麼會這樣呢?

6

主題

64

回帖

0

積分

新手上路

一星級會員

舊站積分
0
舊站發表文章數
77
發表於 2001-10-29 00:20:10 | 顯示全部樓層
再補充一下好了..
在那個 Song index 選單畫面裡,
應該說其實整個背景都有點閃爍..
就有點像電腦螢幕我們把更新頻率只設在 60Hz 的那種感覺..
覺得很奇怪, P-scan 不是理論上應該更不會有這種閃爍的感覺嗎?

2

主題

14

回帖

0

積分

新手上路

初級會員

舊站積分
0
舊站發表文章數
15
發表於 2001-10-29 19:07:23 | 顯示全部樓層
推一下:-)

570

主題

5276

回帖

70

積分

新手上路

努力看事情光明面的Tom

舊站積分
1645
舊站發表文章數
5159
 樓主| 發表於 2001-10-29 21:29:01 | 顯示全部樓層
不好意思
我的式液晶投影機
所以完全感覺不到CRT的這個問題
理論上來說絕對是9000倍頻輸出較好
至於為何這樣
要看過現場實況才知道!

...............................

最近公事繁忙
暫時閉關修養
目前使用的器材和心得(gundam奮鬥之路)
http://pub31.ezboard.com/favlife ... e?topicID=201.topic

2

主題

14

回帖

0

積分

新手上路

初級會員

舊站積分
0
舊站發表文章數
15
發表於 2001-10-30 09:22:07 | 顯示全部樓層
謝謝 gundam 兄!
昨天接上 iscan pro 測試, 結果如下:
1. vcd disc + vcd player + 950 drc 極差
2. vcd disc + dvd player (9000es progressive) + 950 好很多
3. vcd disc + vcd player + iscan pro + 950 比 2. 好一點點的樣子, 好像沒啥差別, 旁觀者說好一點
4. vcd disc + dvd player (9000es interlace) + iscan pro + 950 看不出與 3.的差別
由於測試時間不長, 又需要龜在電視下拔線插線, 累死人了, 結果可能稍有偏差.
目前暫時以 9000es interlace + iscan pro + 950 觀賞 dvd,
但是又有另一個缺點了, brightness, constract, tint, sharpness...
都必需透過 iscan pro 來調整而無法以 950 來調整了, 我目前是先用 9000es + 950
配合 video essential, avia 調整完畢再接上 iscan pro 而 iscan pro 的調整值皆置中不動.

2

主題

14

回帖

0

積分

新手上路

初級會員

舊站積分
0
舊站發表文章數
15
發表於 2001-10-31 11:33:36 | 顯示全部樓層
參考一下 www.hometheaterhifi.com 的文章, 好像大部份的 dvd player 都用 genesis 的 chipset 耶 (9000es, sd9200, ...)
A look at some common chipsets

Genesis gmVLX1A-X & gmAFMC

This is by far the most common deinterlacing chipset used in progressive DVD players. The gmVLX1A-X is the actual deinterlacer, and has both a film mode and a video mode, as well as a 「graphics」 mode which is just a simple weave of every pair of fields. The main chip does not, however, have any way of analyzing the video to determine whether it should be in film mode or not, and that』s where the gmAFMC comes in. It uses data (provided by the gmVLX1A-X) to figure out if there is a 3-2 pulldown sequence coming in, and switches the main chip on the fly between video and film modes.

Not all players use both chips. Some players use their own strategy for deciding when to be in film mode and when to be in video mode, so they forgo the gmAFMC. We』ll mention that in the individual player reviews. But most players use the two chips as a set.

The video mode on the Genesis is not motion-adaptive as we have defined the term. It uses "vertical-temporal filtering" which appears to us to be a slightly more advanced version of the vertical filtering we mentioned above, with the current field providing more of the input to the finished frame than the next or previous fields. It switches to a simple weave algorithm when the image is still or near-still. Overall, its video deinterlacing is poor, but watchable.

The Genesis chipset offers lots of useful options, including scaling 4x3 input to 16x9 output, and scaling any input signal to a wide range of output resolutions. These features were designed for the scaler market, but some DVD players are starting to make use of them for scaling and zoom features, and doing things like automatically scaling letterboxed movies to make them appear to be anamorphic to the TV.

The main Achilles heel of the Genesis chipset is that it doesn』t buffer more than one field, so it can』t look ahead to see cadence breaks coming in advance. Accordingly, the Genesis is almost guaranteed to comb on 3-2 pattern breaks. By the time it knows the cadence has broken, it has already sent out at least one bad frame. In addition, the Genesis is not very good at identifying or handling 2-2 cadence, which comes up more than you might think.

The players that use the Genesis chipset don』t all have exactly the same deinterlacing performance. There are tradeoffs that can be made by adjusting the sensitivity of the gmAFMC chip to cadence mismatches, and that causes some players to do better than others on certain kinds of material. Often, though, on other material the advantage is flip-flopped. There is no perfect setting.

Silicon Image Sil503 (DVDO DV103)

(DVDO recently was purchased by Silicon Image, so we'll refer to current chips by their Silicon Image names, and older chips by the DVDO names.) This chip (like its earlier incarnations, the DV101 and DV102/Sil502) is a single-chip solution that does both deinterlacing and mode detection. It does not scale the signal to different resolutions, but the latest revisions of the chip can do 4x3 to 16x9 conversion. While the bulk of the work is done by the SiI503, Silicon Image also recommends an off-the-shelf programmable coprocessor be used as well, running their proprietary MC503 software. This adds more sophisticated cadence analysis, and improves the handling of complicated material immensely. Almost all DVD players use this extra chip.

The Silicon Image chip buffers 4 fields at all times, which it uses for cadence analysis as well as motion analysis in video mode. As a result, it is much better than the Genesis at handling cadence problems, and combs very little. Its video-mode deinterlacing algorithm is motion-adaptive, and is substantially better than the one on the Genesis. It handles 2-2 cadence with no trouble. Overall, it』s one of the best performing deinterlacers on the market, comparable only to much more expensive products from Faroudja, and a few others.

The video deinterlacing on the Silicon Image is motion-adaptive on a pixel-by-pixel basis, which is very good. The Silicon Image has some edge detection and smoothing algorithms, but they are not as complex as the ones on the Sage chip. Overall, however, the Silicon Image does an excellent job deinterlacing video material.

91

主題

325

回帖

0

積分

新手上路

二星級會員

舊站積分
21
舊站發表文章數
229
發表於 2001-11-19 23:42:52 | 顯示全部樓層
請問你怎麼將倍頻器( iscan pro )接到電視上,謝謝
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-20 06:51 , Processed in 0.358657 second(s), 40 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表