The following procedure requires a Philips RU880 remote control to make your DVD-recorder "Region Code Free"
This "region code free" procedure is applicable for the following DVD-recorders: Philips DVDR70, DVDR75 and DVDR77 !
How to program the <+> (program UP key) of the Philips RU880 remote control:
===================================================================
1) Press and hold key <7> and key <9> together untill your remote display shows "SYNTH".
2) Press the following keys after each other: <2> <3> <5>, the remote control will show "press mode" in the display.
3) Press the <DVD> key, the remote control will show "press mode" in the display.
4) Press the <+> key.
To make one of the above DVD recorders Region Code Free:
====================================================
1) Press the <System > key on your DVD recorder remote control
2) Go down in the first menu item (User preference) and select for entry (5th) "remote control used" the "DVD player" (instead of "DVD recorder" which is the default! )
3) Leave the system menu by pressing <System> key.
4) On the Philips RU880 remote control press <DVD> than press the <+> buttom you just have programmed. => The magic "dashes"should appear on your DVD-recorder display!
5) On your DVD-recorder remote control press the following key sequence:: 121212005255 PLAY ==> Your DVD-recorder is now Region code Free.
6) Press the <System > key on your DVD recorder remote control.
7) Go down in the first menu item (User preference) and select for entry (5th) "remote control used" the "DVD recorder" (Reverse action from step 2)
8) Leave the system menu by pressing <System> key.