新手上路
五星級會員
- 舊站積分
- 30892
- 舊站發表文章數
- 7042
|
發表於 2011-9-19 10:27:24
|
顯示全部樓層
原發表者是 Alan T
[B]謝謝以上前輩快速回答
6B買了N年第一次使用唱放因此完全陌生
L3A我先前有得到原廠回覆說是搭配0.2~0.3mv唱頭,
the ML6B is an L3A, then the specifications for it are:
54 dB of gain for medium level moving coil cartridges; the output of the cartridge should be between .2 mV and .3 mV @ 3.54 cm/sec. The input impedance of the L3-A is 825 ohms, and can be lowered by adding a resistor externally.
...........................
Alan,
A low output moving coil cartridge would be rated at .2 mV @ 3.54 cm/sec and lower.
A medium output moving coil cartridge would be rated at .2 mV and .3 mV @ 3.54 cm/sec
A high output moving coil cartridge would be rated at .3 mV @ 3.54 cm/sec and greater.
.............................................
若要改輸入組抗原廠要我參考ML-7A手冊裡的公式(搭配電容及電阻, 但是6B應該外加在接線因為內部接頭直入PC版沒有機會)
我希望這兩天可以等到原廠答案
另外請問6B內部 寫Line Gain 的"Rocker Switch" 是用來調整Phono stage的嗎?
再次謝謝
[/B]
google到的參考一下,54dB的增益用搭mm唱頭或是高輸出的MC頭是ok的,0.25mV輸出是不太夠的......
http://www.records33.com/bbsview.asp?keyno=927 |
|