忘記密碼
 立即註冊
查看: 44301|回覆: 139

YS-AUDIO 討論區

[複製鏈接]

54

主題

1103

回帖

150

積分

新手上路

三星級會員

舊站積分
1587
舊站發表文章數
858
發表於 2014-1-26 12:35:06 | 顯示全部樓層 |閱讀模式
準備中

http://www.ys-audio.com/

THE REAL MM,MC四件式旗艦唱頭放大器












Flagship grade Phono preamplifier.

The mono block with external power supply , 4 unit design.

The Real use T-LCR type RIAA EQ design, the T-LCR Type is best method for revive RIAA EQ, also is highest cost design.

It uses 12AX7 ,WE396A  with Tango line output transformer for input stage, special made T-LCR type RIAA EQ , WE417A with Tango  line output transformer output stage( with XLR and RCA output).

The The Real 's application of a highly efficient solid-state voltage regulator with 6X4 Tube for current regulator and tow Tango choke in the HVB+ power supply . Also it use the external power supply get highest S/N.

The MC step up transformer use Hasimoto ( made in Japan )

Features  

Western Electric 396A with Tango line transformer in input stage.
Western Electric 417A with Tango line transformer in output stage.
T-LCR type RIAA EQ design
Class A .
Vishay/Dale RN55, Vishay VTA55 and Caddock resistors.
Hasimoto MC step-up transformer.
XLR output and RCA output
External power supply
Tango main transformer , Tango choke.

Controls.
Power Supply : Power On/Of .

Main Unit :
Output XLR/RCA, Phase Normal / Inverse , Input MC/MM , MC Gain High/Low , MC Impedance,  MC Input 1,2,3 .

Output :  1 pair Main XLR , 1pair Main RCA.

Input : MC1 input , MC2 input , MC3 input, MM input ( all RCA ).

Output Impedance :  
600 ohms ( XLR and RCA same ) , 600 ohms minimum load.

Frequency Response: +/- 0. 15dB 20Hz to 20KHz , RIAA equalized , ( -3db at 75khz )

Input Impedance:

MC low gain:
DC Impedance 12ohm ( for 7 ~ 40ohm internal DC Impedance of MC cartridge )
Zi Impedance 200 ohm ( for load Impedance over 100 ohm MC cartridge )

MC high gain:
DC Impedance 3ohm ( for 2 ~ 7ohm internal DC Impedance of MC cartridge )
Zi Impedance 50 ohm ( for load Impedance over 20 ohm MC cartridge )

The impedance selector is select the load impedances of the MC step-up transformer output. (the impedance can change by module )

MM is 47K / 100P ( the capacitance impedance can change by module )

Gain:
MM gain 41dB,
MC1 low gain 58.5dB, MC1 high gain 62dB
MC2 low gain 64.5dB, MC1 high gain 70.5dB

Noise: MM 93.5dB (shorted input) , MC 93dB (shorted input).
signal-to-noise ratio, below 1 Volts RMS output,  A weighted

Phase Mode : Normal / Inverse.

Max input : MM 80mV, MC 8mV
Distortion: Less than .04% at 0.5V RMS 1kHz output.

Tube Compliment : 12AX7 x2, WE396A x2,  WE417A x2 , 6X4 x1.

Dimension:
Main unit , 400mm x 310mm x 80mm (W x D x H)
Power Supply ,455mm x 350mm x 120mm (W x D x H)

Total Weight: 33kg

Power Source: 110-127/220 - 240V,50/60Hz

54

主題

1103

回帖

150

積分

新手上路

三星級會員

舊站積分
1587
舊站發表文章數
858
 樓主| 發表於 2014-1-26 12:37:46 | 顯示全部樓層
THE REAL-TU MM,MC 兩件式旗艦唱頭放大器

售價NT.260000













Flagship grade Phono preamplifier.

The main stage with external power supply , 2 unit design.

The Real use T-LCR type RIAA EQ design, the T-LCR Type is best method for revive RIAA EQ, also is highest cost design.

It uses 12AX7 ,WE396A  with Tango line output transformer for input stage, special made T-LCR type RIAA EQ , WE417A with Tango  line output transformer output stage( with XLR and RCA output).

The The Real 's application of a highly efficient solid-state voltage regulator with 6X4 Tube for current regulator and tow Tango choke in the HVB+ power supply . Also it use the external power supply get highest S/N.

The MC step up transformer use Hasimoto ( made in Japan ) and Jensen ( made in USA )

Features  

Western Electric 396A with Tango line transformer in input stage.
Western Electric 417A with Tango line transformer in output stage.
T-LCR type RIAA EQ design
Class A .
Two MC step up transformer , Hasimoto and Jensen
Vishay/Dale RN55, Vishay VTA55 and Caddock resistors.
Hasimoto MC step-up transformer.
XLR output and RCA output
External power supply
Tango main transformer , Tango choke.


Controls.
Power Supply : Power On/Of .

Main Unit :
Output XLR/RCA, Phase Normal / Inverse , Input MC/MM , MC Gain High/Low , MC Input 1,2,.

Output :  1 pair Main XLR , 1pair Main RCA.

Input : MC1 input , MC2 input, MM input ( all RCA ).

Output Impedance :  
600 ohms ( XLR and RCA same ) , 600 ohms minimum load.

Frequency Response: +/- 0. 15dB 20Hz to 20KHz , RIAA equalized , ( -3db at 75khz )

Input Impedance:

MC1 use Jensen step-up transformer.
MC2 use Hasimoto step-up transformer.

MC1 low gain:
DC Impedance 5 ohm ( for 4 ~ 60ohm internal DC Impedance of MC cartridge )
Zi  Impedance 700 ohm ( for load Impedance over 400 ohm MC cartridge )

MC1 low gain:
DC Impedance 2.5ohm ( for 1 ~ 40hm internal DC Impedance of MC cartridge )
Zi Impedance 310 ohm ( for load Impedance over 100 ohm MC cartridge )

MC2 low gain:
DC Impedance 12ohm ( for 7 ~ 40ohm internal DCImpedance of MC cartridge )
Zi Impedance 200 ohm ( for load Impedance over 100 ohm MC cartridge )

MC2 high gain:
DC Impedance 3ohm ( for 2 ~ 7ohm internal DC Impedance of MC cartridge )
Zi Impedance 50 ohm ( for load Impedance over 20 ohm MC cartridge )

MM is 47K / 100P ( the capacitance impedance can change by module )

Gain:
MM gain 41dB,
MC1 low gain 58.5dB, MC1 high gain 62dB
MC2 low gain 64.5dB, MC1 high gain 70.5dB

Noise: MM 93.5dB (shorted input) , MC 93dB (shorted input).
signal-to-noise ratio, below 1 Volts RMS output,  A weighted

Phase Mode : Normal / Inverse.

Max input : MM 80mV, MC 8mV
Distortion: Less than .04% at 0.5V RMS 1kHz output.

Tube Compliment : 12AX7 x2, WE396A x2,  WE417A x2 , 6X4 x1.

Dimension:
Main unit , 455mm x 350mm x 200mm (W x D x H)
Power Supply ,455mm x 350mm x 180mm (W x D x H)

Total Weight: 30kg

Power Source: 110-127/220 - 240V,50/60Hz

54

主題

1103

回帖

150

積分

新手上路

三星級會員

舊站積分
1587
舊站發表文章數
858
 樓主| 發表於 2014-1-26 12:40:56 | 顯示全部樓層
Reference one MKII PHONO MM,MC 電源分離式唱頭放大器
















Specifications

Controls.
Power Supply : Power On/Of .
Main Unit : Gain select, Phase Normal / Inverse , Input MC/MM , MC Gain High/Low , MC Input 1 or 2.

Output :  1 pair Main XLR , 1pair Main RCA.

Input : MC1 input with RCA , MC2 input with RCA , MM input ( all RCA ).

Output Impedance :  
600 ohms ( XLR and RCA same ) , 600 ohms minimum load.

Frequency Response: +/- 0. 2dB 20Hz to 20KHz , RIAA equalized

Input Impedance:
MC low gain:
DC Impedance 12ohm ( for 7 ~ 40ohm internal DCImpedance of MC cartridge )
Zi Impedance 200 ohm ( for load Impedance over 100 ohm MC cartridge )

MC high gain:
DC Impedance 3ohm ( for 2 ~ 7ohm internal DC Impedance of MC cartridge )
Zi Impedance 50 ohm ( for load Impedance over 20 ohm MC cartridge )

MM is 47K / 100P ( the capacitance impedance can change by module )

Gain:
1 is Low MC 72.5dB / High MC 78.5dB / MM 49dB ,
2 is Low MC 71.5dB / High MC 77.5dB / MM 48dB ,
3 is Low MC 69.5dB / High MC 75.5dB / MM 46dB ,
4 is Low MC 67.5dB / High MC 73.5dM / MM 44dB ,
5 is Low MC 66dB / High MC 72dB / MM 42.5dB ,
6 is Low MC 62.5dB / High MC 68.5dB / MM 39dB ,

Noise: MM 90.5dB (shorted input) , MC 90dB (shorted input).
signal-to-noise ratio, below 1 Volts RMS output,  A weighted

Phase Mode : Normal / Inverse.

Max input : MM 80mV , MC 8mV
Distortion: Less than 0.2% at 2.8V RMS 1kHz output.

Tube Compliment : 12AX7 x2, WE396A x2,  5687WB x2, EZ80 x2.

Dimension:
Main unit , 455mm x 350mm x 120mm (W x D x H)
Power Supply ,400mm x 310mm x 80mm (W x D x H)

Total Weight: 23kg

Power Source: 110-127/220 - 240V,50/60Hz

 

54

主題

1103

回帖

150

積分

新手上路

三星級會員

舊站積分
1587
舊站發表文章數
858
 樓主| 發表於 2014-1-26 12:43:07 | 顯示全部樓層
Balance P2 MM,MC 電源分離式唱頭放大器


售價:NT.78000









Controls :
Power Supply : Power On/Of .
Main Unit : Phase switch  Normal / Inverse , MC/MM input switch , MC input 1 / 2 switch.
EQ network Selector , Gain select .

Output :  RCA one pair XLR one pair

Input :  MC1 input ,  MC2 input, MM input

Frequency Response:  -/+ 0.25dB, 20Hz to 20kHz, RIAA equalized

MC Step-up Input Impedance
1.5 ~ 40ohm internal (output ) Impedance of MC cartridge

Gain:
1 is MC 75.5dB / MM 55.5dB , 2 is MC 74dB / MM 54dB , 3 is MC 73dB / MM 53dB ,
4 is MC 71dB / MM 51dB , 5 is MC 69dB / MC 49dB , 6 is MC 65.5dB / 45.5 dB

Noise:  MM 85dB (shorted input) , MC 84dB (shorted input).
signal-to-noise ratio, below 1 Volts RMS output,  A weighted

Distortion: Less than .06% at 0.5V RMS 1kHz output.
Maximum input: MM is 50mv , MC is 5mv .

Tube Compliment : 12AX7 x3 , 6X4 x1 , 5687WA/B x2

Dimension:  
Main unit , 455mm x 350mm x 120mm (W x D x H)
power supply 160mm x 135mm x 60mm (W x D x H).

Weight: 10kg

Power Source: 110-127/220-240V,50/60Hz

54

主題

1103

回帖

150

積分

新手上路

三星級會員

舊站積分
1587
舊站發表文章數
858
 樓主| 發表於 2014-1-26 12:45:59 | 顯示全部樓層
Concerto Plus MC-Signature  Tubes Phono Stage Eq-Preampilier















Specifications

Controls :
EQ network Selector , MC1/MC2 input select, MC gain high / low select.
MC /MM input select , Power On/Of

Output :  High x1 , Low x1

Input :  MC1 input , MC2 input , MM input

Frequency Response:  -/+ 0.2dB, 20Hz to 20kHz, RIAA equalized

Input Impedance:

MC low gain:
DC Impedance 12ohm ( for 7 ~ 40ohm internal DC Impedance of MC cartridge )
Zi Impedance 200 ohm ( for load Impedance over 100 ohm MC cartridge )

MC high gain:
DC Impedance 3ohm ( for 2 ~ 7ohm internal DC Impedance of MC cartridge )
Zi Impedance 50 ohm ( for load Impedance over 20 ohm MC cartridge )

MM is 47K / 100P

MM Gain: 48dB at high output , 44dB at low output.

Total gain MC step-up with MM stage:
MC gain set at low , 71dB at high output , 67dB at low output.
MC gain set at high , 77dB at high output , 73dB at low output.
Noise: MM 84dB (shorted input) , MC 79dB (shorted input).
signal-to-noise ratio, below 2.5 Volts RMS output,  A weighted

Distortion: Less than 0.2% at 2.5V RMS 1kHz output.
Maximum input : MM 50mv , MC 5mv .

Tube Compliment : 12AX7 x3 , EZ81(or EZ80 ) x1

Dimension:  
main 400mm x 310mm x 150mm (W x D x H) ,
power supply 160mm x 135mm x 60mm (W x D x H).

Weight: 7kg

Power Source: 110-127/220-240V,50/60Hz

 














Concerto Plus MC-TSE MM,MC電源分離式唱頭放大器

售價:NT.39800












Controls : EQ network Selector , MC /MM input select , MC input impedance/ gain select (inside),  Power On/Of

Output :  High x1 , Low x1

Input :  MC input , MM input

Frequency Response:  -/+ 0.25dB, 20Hz to 20kHz, RIAA equalized

MC Step-up Input Impedance and gain:
1 for over 600 ohm load impedance of MC cartridge 19dB gain
2 for over 20ohm ~ 600 ohm load impedance of MC cartridge and 26dB gain

MM Gain: 47dB at high output , 43dB at low output.

Total gain MC step-up with MM stage:
MC set at 1 , 67dB at high output , 63dB at low output.
MC set at 2, 73 dB at high output , 69dB at low output.
Noise: MM 84dB (shorted input) , MC 78dB (shorted input).
signal-to-noise ratio, below 1 Volts RMS output,  A weighted

Distortion: Less than .07% at 0.5V RMS 1kHz output.
Maximum output : MM 50mv , MC 5mv .

Tube Compliment : 12AX7 x3 , 6X4 x1

Dimension:  
main 400mm x 310mm x 80mm (W x D x H) ,
power supply 160mm x 135mm x 60mm (W x D x H).

Weight: 6kg

Power Source: 110-127/220-240V,50/60Hz

54

主題

1103

回帖

150

積分

新手上路

三星級會員

舊站積分
1587
舊站發表文章數
858
 樓主| 發表於 2014-1-26 12:48:08 | 顯示全部樓層
YS-AUDIO香港試音室













54

主題

1103

回帖

150

積分

新手上路

三星級會員

舊站積分
1587
舊站發表文章數
858
 樓主| 發表於 2014-1-26 12:50:16 | 顯示全部樓層
Concerto Plus MC. MC,MM唱頭放大

售價:NT.29800









Controls : EQ network Selector , MC /MM input select , MC input impedance/ gain select (inside),  Power On/Of

Output :  High x1 , Low x1

Input :  MC input , MM input

Frequency Response:  -/+ 0.25dB, 20Hz to 20kHz, RIAA equalized

MC Step-up Input Impedance and gain:
1 for 100 ohm ~ 600 ohm load impedance of MC cartridge , 19dB gain.
2 for 20 ohm ~ 150 ohm load impedance of MC cartridge ,  26dB gain.

MM Gain: 47dB at high output , 43dB at low output.

Total gain MC step-up with MM stage:
MC set at 1 , 67dB at high output , 63dB at low output.
MC set at 2, 73 dB at high output , 69dB at low output.
Noise: MM 82dB (shorted input) , MC 76dB (shorted input).
signal-to-noise ratio, below 1 Volts RMS output,  A weighted

Distortion: Less than .07% at 0.5V RMS 1kHz output.
Maximum input : MM 50mv , MC 5mv .

Tube Compliment : 12AX7 x3 , 6X4 x1

Dimension:  
main 400mm x 310mm x 80mm (W x D x H) ,

Weight: 5.2kg

Power Source: 110-127/220-240V,50/60Hz

54

主題

1103

回帖

150

積分

新手上路

三星級會員

舊站積分
1587
舊站發表文章數
858
 樓主| 發表於 2014-1-26 12:52:43 | 顯示全部樓層
保留3

579

主題

1946

回帖

0

積分

新手上路

四星級會員

舊站積分
226
舊站發表文章數
1102
發表於 2014-1-28 00:26:54 | 顯示全部樓層

用 Sophia 3 ???

原發表者是 zorin
[B]YS-AUDIO香港試音室







[/B]

54

主題

1103

回帖

150

積分

新手上路

三星級會員

舊站積分
1587
舊站發表文章數
858
 樓主| 發表於 2014-1-28 12:24:54 | 顯示全部樓層

Re: 用 Sophia 3 ???

原發表者是 kvnlee
[B] [/B]


是Wilson audio,應是Sophia 3.
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-19 12:07 , Processed in 0.051335 second(s), 42 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表