新手上路
二星級會員
- 舊站積分
- 461
- 舊站發表文章數
- 208
|
樓主 |
發表於 2016-6-6 21:14:15
|
顯示全部樓層
Re: Re: Re: What? 唱放阻抗設太低,唱頭會壞?
基本上,在下面的段落,他說,阻抗低,針桿運動會遇到較多阻力。
他那時口頭跟我說,如果阻抗非常低,針桿阻力大,唱頭的壽命會變短。
出處:
http://www.whatsbestforum.com/sh ... ng-A-Misnomer/page7
摘要:
「the lower the load resistor value is, and the closer the net impedance is to the cartridge's internal resistance, the more current will be produced.
Forcing the cartridge to produce more current works it harder, and in so doing, stiffens the compliance (the cantilever moves less readily). Making the net impedance closer to the cartridge's internal impedance (by using lower-value load resistors) will also attenuate the voltage output from the cartridge, which makes the job of the phono stage (the vast majority of which are voltage amplification devices) harder.」
原發表者是 brtsai
[B]我以前年輕時有一次和他及幾個人吃飯時,他講的。我那時不懂,也沒問清楚。
記得他後來在某個網頁的論壇有講到,待我找到再PO出來。
[/B] |
|