忘記密碼
 立即註冊
查看: 39782|回覆: 2

Graaf GM 100 換管調整整理

[複製鏈接]

299

主題

1196

回帖

50

積分

新手上路

二星級會員

舊站積分
34
舊站發表文章數
222
發表於 2020-7-10 13:40:50 | 顯示全部樓層 |閱讀模式
小弟日前得了兩台 Graaf GM100 擴大機 使用PL504 跟6922 管, 換了其中一台4根 6922 訊號管之後 機器就一直不太穩定 大約使用10 分鐘後就會有暴聲, 怕是功率管 也掛了..... 想要做整理 但搜遍各地文件也沒法搞定

想請問各位先進 是否有認識高手可以調整?

PL504 台灣難找, Graaf GM 100 在台灣更是少 但聲音真的很棒...

懇請各位先進幫忙

感謝

Howard Lee

114

主題

1669

回帖

155

積分

新手上路

四星級會員

舊站積分
5604
舊站發表文章數
1184
發表於 2020-7-10 14:45:46 | 顯示全部樓層

Re: Graaf GM 100 換管調整整理

下面是Audiogon discussion 節錄出來的, 不是我寫的


Just read your graaf post and I posted just before you about a year ago. My post also cited problems - take a look. My graaf also required replacement of the large capacitors (one or two as I recall), a power tube socket, a resistor, and one other thing I can not recall. However, after I purchased some Zeros - autotransformers - that stepped up the speaker input impedance - all problems went away and the sound improved dramatically. With the zeros in place, the amp had no problems for well over a year of steady use. Before I sold the amp, I had the tubes replaced and the unit fully checked out by an authorized Graaf service facility and was perfect.

My speakers are the Alon IVs with an impedance range from 8 to 3 ohms! I looked up your speakers and it looks like their impedance is 4 ohms. The amp specs say that it wants to push against no less than 8 ohms. So, I suspect that your amp may be working too hard - I recommend the autotransferms by Paul Speltz (you can search direct and there is a link on the atmasphere web page (they make OTLs also). As I understand it, OTLs are very sensitive to speaker impedance, and while tube amps (unlike ss amps) are also sensitive to speaker impedance, the lack of an output transformer makes the OTL design more vulnerable. My dealer (Stereo Unlimited in Walnut Creek, CA) knowingly and ignorantly sold me the $5K amp to drive my Alons (which they also sold me) - I do not do business with them any more.



原發表者是 Howardlee
[B]小弟日前得了兩台 Graaf GM100 擴大機 使用PL504 跟6922 管, 換了其中一台4根 6922 訊號管之後 機器就一直不太穩定 大約使用10 分鐘後就會有暴聲, 怕是功率管 也掛了..... 想要做整理 但搜遍各地文件也沒法搞定

想請問各位先進 是否有認識高手可以調整?

PL504 台灣難找, Graaf GM 100 在台灣更是少 但聲音真的很棒...

懇請各位先進幫忙

感謝

Howard Lee [/B]

299

主題

1196

回帖

50

積分

新手上路

二星級會員

舊站積分
34
舊站發表文章數
222
 樓主| 發表於 2020-7-10 15:28:09 | 顯示全部樓層

Re: Re: Graaf GM 100 換管調整整理

謝謝您
這一整段我都查過 是寫 GM20 的問題  跟我的 GM 100 架構不太同

我有找到GM100 Bias 跟Offset 的調整說明, 只是小弟不是專業 對這種 service 手冊的內容瞭解不深 希望有高手能來協助

感恩

Howard Lee
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-18 15:19 , Processed in 0.036801 second(s), 28 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表