新手上路
三星級會員
- 舊站積分
- 10
- 舊站發表文章數
- 820
|
樓主 |
發表於 2002-3-22 23:42:27
|
顯示全部樓層
原發表者是 LoFi
[B]asco,
Sorry, I don't have Chinese software in my PC.
I am also a newbie. One way to adjust colour temperature is to adjust the gain of red, green and blue.
You have to enter the "service menu" or "factory menu" of the projector to do that.
To enter "service menu", use the remote control. Press [enter], [enter], [up], [down] and [enter].
A question "Do you want to enter service menu?" will appear on the screen. If you want to, press [up].
Press the same keys (as above) when you want to leave "service menu".
Remember to write down the factory settings before you change anything. Because they cannot be recovered except by sending back to Japan.
Also, please save any changes if you want to keep them permanently.
Good luck.
The more scientific way to adjust colour temperature is by using the SMART II software. See the web site:
http://home.pacbell.net/steve367/ [/B]
Hello LOFI,
Thanks for your very detailed answer regarding how to adjust the 11HT. I did not do it now , but I think it might help. I have two days to try it, and problaby will have questions after that. Hope still can get your help. Thanks again for your enthusiastic help. |
|