新手上路
初級會員
- 舊站積分
- 3
- 舊站發表文章數
- 13
|
發表於 2008-7-22 00:04:04
|
顯示全部樓層
abHDTV.Net 的花樣越來越多,這就是所謂的 rapidoor post。基本上NZB 不再放置於 usenet,而是放在 rapidshare.com (!119961962) 或 www.zshare.net (Z!144953490f45e035) 上。
要如何下載? 看看下面的說明文件吧! (對不起英文的,後段有密碼相關資訊)
how to read a rapidoor post
-dos-
scour a.b.hdtv for reviews you might be interested in downloading, you can easily find them as they will all start with '_ABHDTV_REVIEWS_' and include a descriptive name after. these are nfos in either text or image format
=download the nfo file
-tres-
using your downloaded nfo, you are going to create a rapidshare link by concatenating parts together and download a nzb file. in some cases you will create a zshare link instead
IF THE LINK NUMBER BEGINS WITH 'Z!' use the zshare method
OR IF THE LINK JUST BEGINS WITH '!' use the rapidshare method
--=Rapidshare method=--
=start with 'http://rapidshare.com/files/'
=next add the rapidshare link number from the nfo, it will start with an exclamation point at the begining of any line in the nfo, remove the exclamation point
=then add another slash '/'
=now add the exact file name of the nfo, copy and past works best
=finally, remove the file name extension of the nfo if there is one, normally it will be .nfo .txt or .jpb, and replace it with '.nzb.html'
--=Zshare method=--
start with http://www.zshare.net/download/
=next add the zshare link number from the nfo, it will start with the letter Z followed by an exclamation point at the begining of any line in the nfo, remove the letter Z and exclamation point, ie [Z!11291587c6a4e9ff]
=then add another slash '/'
=[NOTE]:there is no need to concatenate the file name in this approach like there is in the rapidshare method which is nice
=example
with nfo file listed below named '_ABHDTV_REVIEWS_DigitalVideoEssentials.DTheater.mpeg2.selectedEDITEDportions.ctgottapee.jpg'
you'll create a link as follows
'http://rapidshare.com/files/108400423/_ABHDTV_REVIEWS_DigitalVideoEssentials.DTheater.mp eg2.selectedEDITEDportions.ctgottapee.nzb.html'
if it was a zshare link with a number like [Z!11291587c6a4e9ff] it would look as follows
'http://www.zshare.net/download/11291587c6a4e9ff/'
-quatro-
load the .nzb file into your usenet client and download
[NOTE: the par2 files will still have their extension, download the smallest one to check your download; you'll also need it for renaming]
-cinco-
run the par2 file and repair if needed, then rename the files back to their original name
-seis-
if you receive a multipart .rar file that needs a password, it will be as follows:
the password should always be 'password ' [the word password, lowercase, followed by the tab character-you'll need to copy/paste this from a notepad file; you'll get it correct if the tab character is shown by a black box character.
-siete-
Enjoy! |
|