新手上路
二鍋頭會員
- 舊站積分
- 1551
- 舊站發表文章數
- 3028
|
發表於 2010-1-10 02:33:25
|
顯示全部樓層
原發表者是 lwc
[B]後來去搞了mazda octal母座跟標準octal座,自己也黏了轉接座,也買到一堆便宜未改動過的uu8.
先前量燈絲就發覺,其燈阻跟5AR4沒啥差別,裏頭恐怕未接降壓電阻,以燈絲電流計算,根本不可能放的進去(衍伸所有號稱5V降4V轉座,恐怕都是騙人的)
最後就把轉座給拆了,如之前猜的,完全沒放電阻,就是把4V燈絲管硬超到5V,如此計算,可多增加25%電流輸出,難怪聲音好到這麼嚇人,因為規格超越所有5U4/5AR4/5Z3....難怪U52都被一拳擊倒,電流輸出能力差了一截. [/B]
是哪家賣管的那麼黑心?
我買的轉接座裡面有些可以看到裡面有顆降壓用的電阻,而且使用轉接座接歐洲的整流管有半年以上,現在有五支使用轉接座的整流管使用在系統上,沒有一支夭折的!
在網站上查到關於UU8的一段資訊
http://www.r-type.org/exhib/aad0183.htm
Quite why they decided to metallise these rectifiers remains a mystery but the only obvious consequence was that they tended to overheat until the metallising corrected the problem by flaking off! This series of rectifiers was not as robust as the stalwart UU5, at least until the 1950s when Mazda seem to have realised that domestic HT rectifiers do not need metallisation See UU7 |
|