忘記密碼
 立即註冊
查看: 419|回覆: 1

聽說 PORCEED 的 PMDT 出了progressive 昇級套件--PVP

  [複製鏈接]

24

主題

98

回帖

0

積分

新手上路

二星級會員

舊站積分
0
舊站發表文章數
139
發表於 2001-6-16 05:15:40 | 顯示全部樓層

聽說 PORCEED 的 PMDT 出了progressive 昇級套件--PVP

Introducing the Proceed PVP
(Progressive Video Processor)

A revolutionary two-card option is available for the Proceed PMDT and it could very well change the way your complete home theater system deals with video processing forever.

Special Design Features

Digital television (DTV) has given us greatly improved pictures and sound with which we may entertain ourselves. However, most of us still have significant legacies of existing videos and programs we like to watch that have not yet benefited from the performance advantages DTV offers. The PVP fills that gap by converting normal, "interlaced" video to 480p "progressive" video, a DTV standard. But with new technology inevitably comes new terminology. A brief introduction to the new jargon is probably in order.

Deinterlacing ("Line Doubling")

Many people mistakenly assume that a line doubler "doubles " the number of lines in the video signal, perhaps through some sort of interpolation. Given the name, this is a reasonable assumption. Unfortunately, it happens to be wrong.

A better name for a line doubler would be a "deinterlacer " or perhaps a "line accumulator." The main task of a line doubler is to buffer up the odd and even lines, reassembling them in the correct order.

Simple (read "cheap") line doublers do just that. They put the first field (the odd numbered lines of information) into memory, then the second field (all the even numbered lines), and then "reshuffle the deck" to put them back into sequential, progressive order. Having done so, they pass along the entire frame to the video display. In fact, they do so twice: once for the time that each field would otherwise have been displayed, so as to avoid flicker. This is precisely what the unsophisticated progressive outputs built into MPEG decoder chips do.

Thus a line doubler reads out entire frames of information as often as individual fields are normally displayed. (This is where the misleading name comes from.)

Since you are now displaying twice as much information in each unit of time, the TV has to work faster to keep up. Specifically, normal NTSC uses a "horizontal rate" of about 15.75 kHz. This means that the electron beam in a CRT is turning on and off 15,750 times per second (roughly).

To display a line-doubled signal, it must turn on and off twice as fast to display all those extra pixels: about 31.5 kHz. "Regular " televisions cannot do this –this is one of the things you pay extra for with DTV designs.

Problem: what if the interlaced camera used to shoot the video in the first place was pointed at something that was moving? During fast action, the subject would have moved between one field and the next. If you simply reassemble field into frame in a simplistic way, you get jagged edges of moving objects because the fields don 』t line up. This is where motion compensation comes in. It uses sophisticated analysis to compensate for such problems, ensuring that objects stay together, despite the motion between one field and the next. Good line doublers handle this sort of thing much better than simple ones do.

Another problem: video today comes from a variety of sources, including:

‧ film at 24 frames per second, progressively scanned during conversion to video;

‧ video cameras, running at an interlaced 30 frames per second;

‧ computer-generated effects and such, running at a progressive 60 frames per second

Despite their origins, what you have coming in from your cable company or on that rental tape is plain, interlaced NTSC video. The conversions from computer-and film-originated material to "make it fit" normal video are quite different.

One of the hallmarks of a great line doubler is its ability to quickly detect patterns in the incoming video that indicate where the signal originally came from, and to switch to the most appropriate method for reconstructing the progressive signal for each source. There are big differences between deinterlacers (line doublers) in this area.

The PVP 480p output

The PVP Progressive Video Processor option for your PMDT provides a progressive component "480p" video signal to your display device. Rather than relying on the unsophisticated progressive output modes of many MPEG decoders used in modern DVD players, the PVP uses high-performance, purpose-designed circuitry to realize truly outstanding progressive video performance.

Specifically, the PVP is based on a third-generation deinterlacing device that accepts the digital video signal directly from the output of the PMDT』s MPEG decoder.

Because this signal has never been converted to analog prior to being deinterlaced, the deinterlacing circuitry can work with the "original bits" and do a superlative job of rendering the most accurate picture possible from the information stored on your DVD.

As described above, the PVP has three different modes, depending on the source of the video footage being reproduced. It also includes advanced adaptive motion compensation to minimize interlace artifacts. Its sophistication goes far beyond the progressive outputs found on most DVD players. In short, it does everything you would expect of a state-of —the-art deinterlacer, with even greater precision, due to the direct digital video connection used within the PMDT, between the MPEG decoder and the deinterlacer.

Video inputs

Having gone to the trouble of "doing it right" with the deinterlacing in the PVP, it seemed wrong to then send you back to the world of poorly-implemented deinterlacing for the rest of the "legacy" components in your system.

Instead, the PVP includes a high quality video inputs board that receives interlaced video (either NTSC or PAL),decodes it, and forwards a digital component video version of the signal to the deinterlacer and video output board. Using the "VP menu" in the PMDT, you can easily select from the component, S-video, and composite inputs on the video inputs card, or select the PMDT itself for watching a DVD.

In this way, several outboard components can benefit from the exacting implementation of the deinterlacer used in the PVP, rather than limiting those benefits to the playing of DVDs only.

A system solution

If you also own a Proceed audio video preamplifier (AVP or PV/PDSD combination), the system becomes significantly more powerful and flexible, while at the same time being even easier to use.

By connecting a communications cable between the PVP-equipped PMDT and the Proceed processor (and making sure that each is running its latest system software) and making a few other connections, you can automatically route all of the composite and S-video signals coming into the processor to the appropriate inputs of the PVP video inputs board for deinterlacing and high quality output.

In addition, the component input on the PVP now becomes available for any other normal, interlaced signal in your system –perhaps a satellite dish. This effectively adds component video switching to our Proceed processors, since there are now two component video sources available to the system: the internal, digital component connection between the PMDT and the PVP; and the external, analog component connection on the video inputs board.

Thus, for example, the PMDT/PVP/AVP system has the following input complement:

‧ four composite inputs

‧ four S-video inputs

‧ one digital component input (direct, within the PMDT itself)

‧ one analog component input (on the video input board of the PVP)

The addition of the PVP to a PMDT/Proceed surround processor system effectively allows the PMDT to be your DVD player, and the system』s video processor, and an expansion video switcher. Better still, because the products can "talk " to each other, everything happens transparently to the user. Simply select the input you want as you always have on the Proceed surround processor, adjust the volume, and relax to enjoy outstanding audio and video performance.

To learn more of the details surrounding the new PVP option for the PMDT, we highly recommend visiting the Owner』s Manual section of the Proceed site and downloading the PVP Owner』s Manual.

A picture is worth a thousand words

We encourage you to visit your local Proceed dealer for a demonstration of the new PVP option for the PMDT. We believe you』ll find that the PVP not only provides an unparalleled level of progressive video performance, but might well offer you the flexibility in video processing for your other video sources that you』ve been waiting for for some time. To locate your local authorized Proceed dealer and schedule a personal demonstration soon, please visit our online Dealer Locator.


672

主題

6698

回帖

100

積分

新手上路

初級會員

舊站積分
1315
舊站發表文章數
6752
 樓主| 發表於 2001-6-17 10:45:30 | 顯示全部樓層
不過價錢還沒定出來,卡門也還沒進.裝上之後,PMDT除了原來的影像輸出之外,還多了RGB/Y,Pb,Pr ,S端子,RCA端子的影像"輸入",看樣子它還可以獨立當倍頻掃瞄器.[]

[B]RYO[/B]

被 RYO 重新編輯於 06/17/2001  10:50:29
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-18 16:30 , Processed in 0.035926 second(s), 24 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表