新手上路
三星級會員
- 舊站積分
- 104
- 舊站發表文章數
- 802
|
發表於 2004-10-21 23:44:08
|
顯示全部樓層
TUFU
hope this help
http://www.divx-digest.com/articles/dtv2avi.html
Step 1 : Using HDTVtoMPEG2
Some DTV streams have channel information stored in the files. The Channel information contains the video and audio PIDs, which are required by the HDTVtoMPEG2 program. However, if your TS file does not have this information, then you'll have to manually enter the video and audio PIDs into HDTVtoMPEG2.
5. The common video and audio PIDs are 0x11 (video) and 0x14 (audio). Ocassionaly, they may be 0x21 (video) and 0x24 (audio). The first digit in the PID is usually your digital program's program ID and the second digit specify the type of stream ('1' for video '4' for audio). Trial and error may be need to determine the right PIDs for your .TS files, and so it is recommended you try different sets of PIDs on a small .TS file until you have found the right PIDs. |
|