忘記密碼
 立即註冊
查看: 43247|回覆: 6

請問山水SANSUI老綜擴入手

[複製鏈接]

19

主題

20

回帖

0

積分

新手上路

初級會員

舊站積分
6
舊站發表文章數
14
發表於 2022-2-12 15:12:19 | 顯示全部樓層 |閱讀模式
各位前輩好
小弟現在是使用主動式喇叭配合黑膠系統
但現在想要把主動式喇叭換掉
改成綜合擴大機+被動式喇叭
唱盤 > 唱放 > 綜擴 > 喇叭
目前想要鎖定SANSUI的老綜擴(AU-D907,707,607型號的)
雖然努力在看些資料了,但是資料量實在太多太亂了XD
所以想請教前輩們,買sansui老綜擴需要注意些甚麼呢?
型號有推薦的嗎? 買老擴我需要很擔心裡面年事已高的零件們嗎?

喇叭目前想鎖定Dali Menuet系列,但應該是三代或四代喇叭
也想一起問問搭配起來是否合適? 或是有其他喇叭建議?
(因為聽音樂空間不大,所以都鎖定小型的喇叭)

綜擴我本來也有想直接找Cambridge CXA61或CXA81之類的
還是直接用現代的綜擴比較推薦?

新手看資料看得很迷茫,問題很多請前輩們不要見怪
先謝謝大家了~~(小弟需要大家給我一些建議跟方向QQ)

2

主題

63

回帖

0

積分

新手上路

一星級會員

舊站積分
67
舊站發表文章數
65
發表於 2022-6-24 12:05:52 | 顯示全部樓層
你所選的 Sansui 機型 已經非常不錯了,這些機器皆有唱放,買老機器前先向賣家確認機況如何,再來就是先找位住家附近有否認識的師傅(或是朋友介紹口啤好)以備不時之需。喇叭則在預算內新舊皆可。老機器不需要特別的線材去侍侯,一個好唱盤,好唱頭 非常輕鬆自在的就可以享受好聲音,好音樂。千萬不要輕忽這些黃金時代的銘機,現代貴森森的機器不一定可以擊敗它們。我的au999 到現在還是頭好壯壯,調整過偏壓而已,7900 七年前整理一下(清潔,除氧化…)如此而已,也沒壞過。祝你順利找到所需的機器享受音樂。

2

主題

63

回帖

0

積分

新手上路

一星級會員

舊站積分
67
舊站發表文章數
65
發表於 2022-6-24 12:10:14 | 顯示全部樓層
原發表者是 sactosim
[B]你所選的 Sansui 機型 已經非常不錯了,這些機器皆有唱放,買老機器前先向賣家確認機況如何,再來就是先找位住家附近有否認識的師傅(或是朋友介紹口啤好)以備不時之需。喇叭則在預算內新舊皆可。老機器不需要特別的線材去侍侯,一個好唱盤,好唱頭 非常輕鬆自在的就可以享受好聲音,好音樂。千萬不要輕忽這些黃金時代的銘機,現代貴森森的機器不一定可以擊敗它們。我的au999 到現在還是頭好壯壯,調整過偏壓而已,7900 七年前整理一下(清潔,除氧化…)如此而已,也沒壞過。祝你順利找到所需的機器享受音樂。 [/B]


87

主題

646

回帖

0

積分

新手上路

二星級會員

舊站積分
1336
舊站發表文章數
511
發表於 2022-11-14 01:36:05 | 顯示全部樓層

Re: 請問山水SANSUI老綜擴入手

AU-D907是1984年生產的機,
Total harmonic distortion: 0.003%
1984年的機採用了新技術使失真下降到0.003%,
但我認為比較受歡迎的Sansui機是1970年1976年之間生產的機,
比如AU-666, AU777,AU888(1970生產的機)
AU6500,AU7700(1976生產的機)雖然失真都在0.1%以上,反而比較受歡迎(我個人的看法)。

這是AU-D907的功放電路圖,很複雜的電路圖如果和AU6500相比:


以下是AU6500的功放電路圖,電路簡單很多:


https://audio-database.com/SANSUI/amp/au-d607x.html
關於au-d607的文章:
Integrated amplifier with X-balanced amplifier.
The basic configuration of the amplifier is an X-balanced amplifier.
The X-balanced amplifier consists of balanced input, balanced output, balanced power supply,
twin diamond balanced differential circuit, and balanced feedback technology.
It has a balanced configuration from input to output and drives the speakers from both the + and - sides.
As a result, the IHM distortion caused by the power supply ripple current and the
interaction between external noise and the back electromotive force,
which was caused by using the - side of the speaker for the common ground in the conventional amplifier, is suppressed.
In addition, the distortion and characteristics in the actual operation of the amplifier are
greatly improved by the configuration in which the balance feedback is
applied to the plus and minus two output stages.
但奇怪的是1970, 1975年的舊機反而比較受歡迎(我個人的看法)。

打開ebay.co.uk 查看二手機價錢 AU-6500賣到£730 而AU-D607才£362。
朋友來我家裡看到我用Tidal串流古典樂192kHz取樣率, 朋友說:「That is mad and overkill! 44.1kHz取樣率就已經足夠復原20kHz以下的音頻了!「 然後朋友邀我坐上他的新車去跑高速公路,我問他的新車引擎多少CC? 他回答:「3000CC 6氣缸引擎」, 我說:「That is mad and overkill! 1000CC 已經跑得上110km/h時速了!

87

主題

646

回帖

0

積分

新手上路

二星級會員

舊站積分
1336
舊站發表文章數
511
發表於 2022-12-5 19:44:50 | 顯示全部樓層

Re: Re: 請問山水SANSUI老綜擴入手

1975年的Sansui AU6500
唱放使用單管串連設計,才使用了三顆晶體管。

朋友來我家裡看到我用Tidal串流古典樂192kHz取樣率, 朋友說:「That is mad and overkill! 44.1kHz取樣率就已經足夠復原20kHz以下的音頻了!「 然後朋友邀我坐上他的新車去跑高速公路,我問他的新車引擎多少CC? 他回答:「3000CC 6氣缸引擎」, 我說:「That is mad and overkill! 1000CC 已經跑得上110km/h時速了!

87

主題

646

回帖

0

積分

新手上路

二星級會員

舊站積分
1336
舊站發表文章數
511
發表於 2022-12-5 19:50:00 | 顯示全部樓層

Re: Re: Re: 請問山水SANSUI老綜擴入手

1978年的Sansui AU717
唱放使用了差動輸入(Opamp設計),晶體管數量增加到八顆。算是最簡單的Opamp設計。
一般Opamp IC集成電路 都有很多數量的晶體管。

朋友來我家裡看到我用Tidal串流古典樂192kHz取樣率, 朋友說:「That is mad and overkill! 44.1kHz取樣率就已經足夠復原20kHz以下的音頻了!「 然後朋友邀我坐上他的新車去跑高速公路,我問他的新車引擎多少CC? 他回答:「3000CC 6氣缸引擎」, 我說:「That is mad and overkill! 1000CC 已經跑得上110km/h時速了!

87

主題

646

回帖

0

積分

新手上路

二星級會員

舊站積分
1336
舊站發表文章數
511
發表於 2022-12-5 19:59:28 | 顯示全部樓層

Re: Re: Re: Re: 請問山水SANSUI老綜擴入手

而1984年的AU-D907,唱放電路複雜了很多。



1980年後的Sansui都採用了1980年新研究開發的Super Feedforward System
但奇怪的是1980年後的Sansui機都沒1970年代的Sansui機那麼受歡迎(我個人的觀點)。
打開ebay.co.uk 查看二手機價錢 AU-6500賣到£730 而AU-D607才£362。
而且AU-D607的功率是90W+90W,而AU-6500的功率才30W+30W

https://www.hifiengine.com/manua ... orward-system.shtml
The history of Hi-Fi amps began in 1947 with the introduction of the Williamson amplifier, the first amp to reduce distortion effectively by using the NFB theory. The Williamson amp. in fact, became a reference amp by which later amps were judged.

There followed a series of new amp designs Tube amps gave way to transistor designs, output-transformer-less amps went output-capacitor-less. and finally, DC amps replaced AC models. Throughout this progression, new devices to reduce distortion still further proliferated. The NFB technique, however, remained indispensable It is no exaggeration to say that there would be no Hi-Fi amps today were it not for its application. It has been proven so effective that almost all amps on the market today make use of it.

Despite its ubiquity, however, NFB is limited in its effectiveness against distortion The NFB technique. as it has been used, cannot achieve 100% reduction of distortion no matter how refined or elaborate its application.

To accomplish this goal, Sansui had to find a breakthrough as startlingly new and different as the Williamson amp was in its time. We accomplished this with the Super Feedforward System. Feedforward theory actually dates back as far as 1928, when it was developed by H.S Black. Although it has long been applied in highly advanced communications systems, efforts to find Hi-Fi audio applications met with no success - until Sansui came up with a unique and untried solution to the problems the technique posed.

We did it by combining, for the first time in audio history, NFB and feedforward techniques. As excited members of the Audio Engineering Society (AES) were first told at a convention in London in February, 1980 (and again in Los Angeles in May of the same year). the Sansui Super Feedforward System has reduced all types of distortion - total harmonic intermodulation, switching, crossover and envelope to zero. Hi-Fi amplifiers will never be the same again.
朋友來我家裡看到我用Tidal串流古典樂192kHz取樣率, 朋友說:「That is mad and overkill! 44.1kHz取樣率就已經足夠復原20kHz以下的音頻了!「 然後朋友邀我坐上他的新車去跑高速公路,我問他的新車引擎多少CC? 他回答:「3000CC 6氣缸引擎」, 我說:「That is mad and overkill! 1000CC 已經跑得上110km/h時速了!
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-18 10:54 , Processed in 0.044349 second(s), 36 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表