新手上路
四星級會員
- 舊站積分
- 3261
- 舊站發表文章數
- 1711
|
發表於 2024-3-11 06:19:48
|
顯示全部樓層
原發表者是 rogers
[B]謝謝,我記得台灣說明書還有設定說明
和功能說明不大一樣
[/B]
裡面是有設定說明. 這是靠 Google Doc 把 PDF 轉成text, 很多辨認的錯誤我已經改過來了但不保證全對. 有問題對照 PDF 原文.
可以用 ChatGPT 把英文翻譯成中文但有些按鈕的標誌也會變成中文, 還是要中英對照看.
PERSONALISING YOUR TEMPO
By use of the LlBRARY system you have access to many different modes to enable you to personalise your TEMPO. Please spend some time studying this section of the manual in order to ensure that you obtain the best possible set-up.
To personalise four TEMPO you will make use of its comprehensive library system. This operates on four levels, which are called consecutively with the LlBRARY key in the order as explained below. If at any time you wish to readjust any settings, you will need to scroll through the LlBRARY system to reach the desired option.
Study this section of the manual thourough and then make four adjustments in order that you may successful/y personalise four TEMPO to four individual requirements.
ln order to make four adjustments, connect ail of fOur input sources and set the volume to a suitable level before proceeding. A reasonable listening level is required in order to accurately adjust the input sensitivity.
REGULATION OF SYSTEM BALANCE
You can regulate the system balance in order to compensate for an input channel imbalance and to centralise the sound image. T0 adjust the balance following this procedure.
Press once the LlBRARYkey. The display window will indicate 'bA' (balance) on the left of the screen and '0 0' on the right. Use the volume keys to alter the system balance. The volume keys will adjust system balance by attenuating one channel, rather than by increasing volume on the other channel. This is displayed bya minus digit on the screen.
ASSIGNING A l'lAME TO THE SOURCE INPUTS
Now that you have adjusted the system balance, depress the LlBRARY key once more to enter the name assignment mode. The display will show 'A l' on the left and 'A l' to the right. Use the volume keys to view the established name options. The name options will blink. When you have located a suitable name (eg. CD, CD2,DCC etc.) press and hold the LOCK key to make fOur selections and store this in memory. When this has been stored the display will cease to blink. Press the SELEG key to move to the next input and repeat the process. Continue until you have assigned names to ail desired inputs.
When a Phono card is fitted, input A 1 will automatically be selected, and 'Pho' will automatically be selected for its name assignment. It is net possible to choose the same name for more than one input. Should you do this the preference will be for the last input that was assigned this name and the other input will revert to its original original source number (such as A3).
ADJUSTMENT OF INPUT SENSITIVITY
Now that you have assigned four input names you may decrease the sensitivity of each input of TEMPO in 1dB steps. Depress the LlBRARY key once more to activate this mode. This allows you to adjust each input so that when you move between them they operate at the same volume level. The display screen will display '-O' on the left and the input name on the right. Depression of the volume keys will cause the left screen value to change and blink. Adjust the sensitivity between the available 0 to -9 db level and store four selection by a continued depression of the LOCK key.
When in this mode the MUTE and SELEG keys are used to move up and down through the different inputs in order to compare between inputs the sensitivity adjustments that you have made.
NOTE. Sensitivity can only be adjusted to a lower level. Therefore in order to match levels between inputs you must choose your least
sensitive input as your referencesand adjust the other inputs down until they match this unit.
LOOP MODE
When you have finalized the sensitivity set up, depress ohe LlBRARY key once more to activate the LOOP MODE option. The LOOP MODE of TEMPO allows you to limit the selection that may be made by the SELEG key to only those inputs that have been assigned a name, thereby avoiding the unecesary action of rotating through inputs that are not attached in order to go to your required input selection. For instance if
you have only three inputs connected (say cd, dAc and Pho) and Loop mode is activated, then on/y these inputs will be active when you
scroll through the input selection.
To activate Loop mode, depress the SELEG key to choose between 'no LooP' (inactive) and 'YE LooP' (active).
You have now completed the personalisation of TEMPO. Press the LIBRARY key to exit the library options. |
|