新手上路
Moderator
- 舊站積分
- 1241
- 舊站發表文章數
- 5254
|
發表於 2006-5-4 13:01:29
|
顯示全部樓層
原發表者是 Akebono
[B]感謝Terry兄釋疑!
Terry兄真是博覽
又 50Hz / 60Hz 的不同
不知是否肇因於基本電源頻率的差異
導致形成連HD1080都有Pal/NTSC的區隔? [/B]
HD時代,歐洲1080/50i與美日的1080/60i不相容,
確實又走回SD年代NTSC, PAL基本不相容的麻煩老路。
據英國資料表示,
歐洲之所以選1080/50i有三個原因:
1. 訂定歐洲規格的歐洲廣播聯盟EBU覺得,
50i流量比較小,可以節省廣播頻寬
2. Akebono答對了!因為歐洲電源是50hz,
採用60i格式拍攝在使用室內照明時,
因為refresh 不同步,容易產生10hz的畫面閃爍
3. 因為SD的PAL就是50i,HD也用50i相容性沒問題
個人還要再加一條:
4. 因為歐洲不想跟在老美與小日本後面,
也採用1080/60i [xx(]
請參考:
http://www.burnyourbonus.co.uk/hdtv-faq/faq2.html
Why is a 50 Hz frame rate being adopted in the Europe when 60 Hz is being used in the US?
The standards to be used in Europe were specified by the Technical Committee of the EBU (European Broadcasting Union.) One reason given is that 50 Hz will mean a lower bit rate so the channel uses less bandwidth. This is of course silly since the same effect can be achieved at 60 Hz by turning up the compression ratio. The incompatibility with the US standards of 60 Hz will of course be a problem. It will mean a reduction of quality in conversion of US programs to Europe because they will effectively have to repeat every 5th frame. No doubt this will show as a judder to the discerning eye. There may be further problems with incompatibility between DVD, computer video and games consoles. Another reason suggested for using 50 Hz in Europe is that the mains frequency is 50Hz. If you film at 60 fps under artificial lighting from a 50 Hz AC supply you may see a 10 Hz flicker. |
|