新手上路
二星級會員
- 舊站積分
- 30
- 舊站發表文章數
- 203
|
發表於 2008-4-3 13:24:54
|
顯示全部樓層
什麼是的AES / EBU ?
A known digital audio standard, AES/EBU is designed and developed by experts in science and technology to handle signals from digital audio systems.一個已知的數字音頻標準的AES / EBU是共同設計和開發的專家在科學和技術處理信號,從數字音頻系統。 It is known officially by the name AES3 and was developed by Audio Engineering Society and the European Broadcasting Union, hence the name.這是眾所周知的,由正式的名稱它帶有AES3和開發了音頻工程協會和歐洲廣播聯盟,因此得名。 It was first publicized in 1989, but was revised later in 1995, 1998, and 2003.這是首次公佈於1989年,但修改後,在1995年, 1998年和2003年。
The Standard Structure標準結構
The AES/EBU or AES3 is made to match the standard maintained internationally under the name IEC 60958.有關的AES / EBU或它帶有AES3是為了配合標準保持在國際上的名義下的IEC 60958 。 It comes to carry a variety of hardware connections defined by the international standard itself, including the following:它來進行各種硬件連接確定的國際標準本身,包括下列內容:
Type I Balanced – This connection carries three conductors and a 110-ohm cabling in twisted pair. I型平衡-這方面帶有3個指揮家和1 10歐姆佈線雙絞線。 The cable has an XLR connector and it is used currently in professional installations.該電纜具有的XLR連接器,它是目前所用的專業設備。
Type II Unbalanced – Composed of two conductors, this connection holds a 75-ohm coaxial cable that is made with an RCA connector.第二類不平衡-組成的兩個導體,這方面持有的7 5歐姆同軸電纜,即取得一個R CA接頭。 This connection is used in consumer audio.這方面,是用於消費音頻。
Type II Optical – An optical fiber hardware connection, this type is often made of plastic or glass.第二類光-一個光纖硬體方面,這種類型往往製成的塑料或玻璃。 It has an F05 connector and is employed in consumer audio, just like the Type II Unbalanced.它有一個f05連接器,並受聘於消費類音頻,就像第二類不平衡。
Apart from such connectors, the AES/EBU can also carry digital audio signals by using the so-called Asynchronous Transfer Mode, a known type of network.除了這些連接器外, AES / EBU格式還可以進行數字音頻信號,以所謂的異步傳輸模式,一種已知類型的網絡。 Note that the packing standard of the AES3 frames directly into the ATM cells is identified and labeled as AES47.注意包裝標準的它帶有AES3幀直接進入ATM單元是確定並打成aes47 。 It is even published under the name IEC 62365.它更是出版名義下的IEC 62365 。
The Standard Protocol該標準協議
The AES/EBU is crafted to support a variety of systems.有關的AES / EBU是製作以支持多種系統。 The PCM encoded audio that comes in DAT format and CD format is what the standard primarily sustains.有關的PCM編碼的音頻進來的DAT格式和CD格式是標準的主要支撐。 But speaking of formats, note that 48 kHz of DAT and 44.1 kHz of CD is the most acceptable.但在談到格式時,請注意48千赫的DAT和44.1千赫的這張專輯是最能接受的。 The standard handles both these formats to make the running and processing of data at any rate possible.標準處理這兩種格式,使運行和處理數據,在任何可能的利率。 Along with this mechanism, the standard works to do some recovering moves with the clock rate, which in turn is handled by encoding the data, utilizing the so-called Biphase mark code (BMC).隨著這一機制的問題,標準的工程做一些康復動作與時鐘速度,而這又是處理編碼數據,利用這種所謂的雙相標誌碼( BMC的) 。
AES/EBU's Channel Status Bit的AES / EBU ' S信道狀態位
The AES/EBU standard is composed of channel bits; each is enclosed in a subframe.有關的AES / EBU標準組成的通道位;各自封閉在副車架總成。 In each subframe, 192 bits of word is processed in a single audio block, translating into a fraction of 192/8 = 24 bytes.在每一副車架總成, 192位元的字是在處理一個單一的音頻塊,轉化成一小192 / 8 = 24字節。 Technically, what the channel status bits contain in AES/EBU is different from that of the SPDIF standard.在技術上,有什麼渠道地位比特包含在的AES / EBU是有別於的SPDIF的標準。 In the former, the basic details of how most parts of the bits are used are explained.在前者,基本的細節如何大部份比特是用來進行說明。 If you are wondering how the 24 bytes are described under the AES/EBU standards, below are the most common descriptions that experts use to explain the process:如果你想知道如何24字節,是描述下的AES / EBU標準,下面是最常見的描述可以看出,專家們使用說明的過程:
Byte 0 is often described as the most basic of the control data available that includes primarily the sample rate, compression, and emphasis.字節0常常被形容為最基本的控制數據,其中包括主要由採樣率,壓縮,和強調。
Byte 1 specifies the type of audio stream used, whether stereo, mono, or a combination of both.字節1指定類型的音頻流中使用,無論是否立體聲,單聲道,或兩者兼而有之。
Byte 2 is for audio word length字節2音頻字長
Byte 3 is employed to handle multi-channel applications字節三是受僱處理多通道應用
Byte 4 is used to describe the suitability of the audio signal as a sampling rate reference第4字節是用來形容適宜的音頻信號作為採樣速率參考
Byte 5 is reserved.字節五日則被保留。
Bytes 6 to 9 and 10 to 13 stand for the double slots of four bytes used in transmitting the ASCII characters.字節6至9及10至13條納入為雙插槽的4個字節用來傳送ASCII字符。
Bytes 14 to 17 are used for 4-byte/32-bit sample address字節14至17是用於4-byte/32-bit抽樣地址
Bytes 18 to 21 stand for the time of day format.字節18至21站,為一天中的時間格式。
Byte 22 holds explanations involved in the reliability of the audio block字節22日舉行的解釋,涉及的可靠性音頻座
Byte 23 is needed for its absence; it leads to interruption of the data stream.字節23需要其缺席導致中斷的數據流。
Note what each of the bytes handles.說明什麼每次的字節處理。 All are maintained to determine a smooth process under the AES/EBU regulations.一切都保持著,以確定一個順利的進程下的AES / EBU法規。 |
|