新手上路
初級會員
- 舊站積分
- 0
- 舊站發表文章數
- 43
|
樓主 |
發表於 2002-5-27 19:05:50
|
顯示全部樓層
原發表者是 SleeplessInSeattle
[B]MLP-201.3

Cabinet Design 2-way, ported
Tweeter 1.1" (28mm) soft dome,
ferrofluid cooled
Woofer 6-卹§ (160mm) paper cone woofer,
vented magnet system,
large 3" (75mm) voice coil
Frequency Response 40 - 20,000 Hz ▽3dB
Impedance 6 W
Power Handling 120 watts RMS
Sensitivity 90 dB SPL
Cabinet Weight 16 lbs (7.3 kg) each
Cabinet Size Height - 13" (330mm)
Width - 8.5" (215mm)
Depth - 10" (254mm)
幰撽USD$490 / pair [/B]
mmm...www.morel.co.il
是model另一個官方網頁...
我問的是這顆說..覺得可以放電腦旁或辦公桌上..[ ]
SA-2

腳架st-80

SoundSpot™ SA-2
2 Way - 2 Unit Magnetically Shielded Speaker System
2 Way - 2 Unit Magnetically Shielded Speaker System Morel's SoundSpot™ SA-2 is redefining industry standards, offering breathtaking audiophile performance from a small and attractive speaker.
The SoundSpot™ SA-2 is a true two-way system, the 100 mm (4") mid/bass unit and a soft-dome tweeter are each housed in their own acoustical chamber - a perfectly shaped steel dome, which minimizes sonic coloration and eliminates music-distorting resonance.
Both drivers utilize Morel's External Voice Coil (EVC) design, in which an Aluminum Hexatech™ Coil surrounds an extremely powerful magnet system. The larger than usual voice coil supports the cone, preventing flexing and buckling which result in a smudged and muddied sound. As a result, a shallow cone can be used, allowing better dispersion of the sound over a wider listening area.
For the mid/bass unit, Morel's proprietary Hybrid Motor was chosen. This powerful combination of Neodymium and Ferrite magnets is up to six times smaller than a conventional magnet achieving the same flux! This leaves more room within the enclosure for the bass notes to build up, in contrast to conventional satellite speakers where the bulk of the volume is taken up by the magnet system. The Hybrid Motor is rear vented to allow acoustic loading of the enclosure volume, and to create strong air circulation that cools the voice coil for higher power handling. The cone is DPC (Damped Polymer Composite), surround and center cap made of one single piece to reduce distortions at high power levels.
The tweeter is soft dome, hand coated with Acuflex™ preventing resonance and reducing distortion. The dome is supported by a 28 mm (11/8") liquid cooled voice coil. As a consequence of the large voice coil diameter, the tweeter's frequency range is extended down to the mid-range band. These unique characteristics allow the use of a simple, first order crossover (only two components!) thereby minimizing crossover-induced disturbances and preserving sound clarity and transparency.
The two drivers are carefully aligned for phase and time coherence, providing precise imaging and an integrated, lifelike sound.
The speakers come with an integral base for easy and flexible installation - the speakers can be placed on a shelf, or hang from a ceiling or wall. As the speakers are magnetically shielded, they can also be placed on the TV top. The pivoting base allows adjusting the speaker angle for optimal acoustic orientation. A stylish stand is also available to complement the SoundSpot™ speakers.
SPECIFICATIONS
Constraction
130mm + 43 mm mild steel sphere enclosures. Acoustical damping treated
Drive units
100mm woofer with OD 54 mm Hexatech aluminium voice coil. Rear vented Hybrid motor Tweeter: Acuflex™ coated soft dome, 28mm liquid cooled Hexatech aluminium voice-coil Rear, vented Neodymium motor
Nominal impedance 8 Ohm
Power handling 120 W (1000W Transients)
Operating power 15-150 W
Crossover 6dB 4000 Hz
Frequency response 60-22000 Hz (-5db)
Sensitivity (1W 1M) 89 dB
Net weight 0.90 Kg
|
|