新手上路
二星級會員
- 舊站積分
- 12
- 舊站發表文章數
- 470
|
樓主 |
發表於 2001-11-15 01:03:23
|
顯示全部樓層
Component to RGB Video Converter
Model 9A62 is the latest addition to Audio Authority´s growing line of audio and video converters for home theater. It converts progressive scan component video on three RCA jacks to RGB video on a VGA connector.
Y Pb Pr to RGB conversion
Two RGB mode settings
Dual RGB outputs
Component in/out pass-through
Special HD-15 VGA to RGBHV cable included
Component Video Cable included
The Model 9A62 allows progressive scan DVD players with component video outputs (480p) to be connected to direct view and projection displays that require RGB inputs. The RGB output on the 9A62 can be connected using a standard VGA cable (not included). If the display is equipped with BNC inputs, the special breakout cable included with the 9A62 can be used.
The RGB Mode switch allows selection of two different sync modes, depending on the input configuration of the video display. Either of the following video formats can be selected:
RGBHV (Red, Green, Blue with separate Horizontal and Vertical sync)
RGBS (Red, Green, Blue, with separate composite Sync)
The 9A62 is not a format converter. It passes the horizontal and vertical synchronization timings and pixel content to the outputs without modification. A 480p component video source with a 9A62 requires your SDTV or HDTV monitor to accept a 480p RGB input.
See Instruction Manual for more information.
請問有人可以幫忙翻譯一下嗎??

ASA is ***a super av***
http://tw.photo.yahoo.com/asa00322kimo/ab1/p1_s.jpg?164344 |
|