忘記密碼
 立即註冊
查看: 3727|回覆: 1

TH-P50ST30工程模式進入方法

[複製鏈接]

39

主題

41

回帖

0

積分

新手上路

一星級會員

舊站積分
83
舊站發表文章數
76
發表於 2011-12-30 17:34:31 | 顯示全部樓層 |閱讀模式
要確實發揮面板性能也只能靠這招了吧
不知是否適用於台規?
聽說開啟後會失去保固
http://www.avsforum.com/avs-vb/showthread.php?t=1364213
6 Service Mode
6.1. How to enter into Service Mode
6.1.1. Purpose
After exchange parts, check and adjust the contents of adjustment mode.

While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds

Note:
Service Mode can not be entered when 3D signal input.
Input 2D signal to enter Service Mode.

6.1.2. Key command
[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )

6.1.3. How to exit
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.

7

主題

19

回帖

0

積分

新手上路

初級會員

舊站積分
0
舊站發表文章數
21
發表於 2012-1-14 23:41:47 | 顯示全部樓層

Re: ST30電漿工程模式進入方法

那個方式我試過P42ST30W是可以
但是離開時要按POWER鍵才能離開的設計就不太好
而且他進入工模時畫面會整個放大一些些
顏色變的跟之前正常大小時的顏色不一樣
這對用校色儀器的人而言不太有利
希望P50ST30不會有這種情形
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-18 21:52 , Processed in 0.239802 second(s), 27 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表