新手上路
三星級會員
- 舊站積分
- 283
- 舊站發表文章數
- 692
|
樓主 |
發表於 2012-5-19 00:23:07
|
顯示全部樓層
Michell Engineering 的答覆
雖說自耦變壓器或可解決轉速調整問題, 但我總覺得原廠出貨, 即便是標準的電源供應器, 還是不應該有轉速的問題, 於是我寫了一封e-mail到Michell Engineering, 以下是回覆:
There is speed adjustment on the power supply. Remove the four Phillips screws from the underside of the psu case and carefully lift off the top. You will see on the circuit board a blue rectangular adjustable potentiometer with a small brass slotted adjuster screw at one end. With a small flat screw driver adjust the pot clockwise to increase speed anti-clockwise to reduce speed. NOTE PLEASE BE AWARE THAT MAINS VOLTAGES ARE PRESENT ON THE CIRCUIT BOARD. Once speed is set carefully re-assemble the power supply making sure that the mains cable sits in the cutout in the box and is not trapped between the base & the lid.
拆開電源供應底下4個螺絲, 小心掀開上蓋盒, 電路板上那個藍色的小方塊旁邊有個銅頭螺絲就是速度調整, 用小支平口起子順時針是加速, 逆時針是減速。依樣施工後我的問題已解決了。 |
|