新手上路
五星級會員
- 舊站積分
- 567
- 舊站發表文章數
- 5403
|
發表於 2001-9-23 16:59:47
|
顯示全部樓層
家庭劇院的音量!
近來有不少朋友買了噪音計,
在與大家聯絡交談中也一直談到音量該如何調整,
由於手頭上一直沒有正式的資料可以佐證所以很傷腦筋!
目前有噪音計的朋友大概就只能做到五個喇叭的音量均衡,
對於重低音音量的調整目前還是沒有一個參考音量!
重低音的音量調整可能還是要由各位自己衡量,
但是拿重低音和噪音計來配合作駐波的尋找倒是蠻有用的!
這時用C加權可能會比較適合!
下午抽空找了一些資料或章鴾j家有幫助:
下面幾項節錄自http://www.dolby.com/tech/co.br.0103.DDFAQ.html
16. Should I use bipolar, dipolar, or tripolar surround speakers?
我該用bipolar, dipolar, 或是三面發聲的tripolar 作環繞喇叭?
Surround speaker placement, room acoustics, and personal preference are as important as the speakers?radiating characteristic. These factors vary greatly, so Dolby Laboratories cannot recommend a particular speaker for home theater use.
Bipolar, dipolar, and tripolar surround speakers use speaker drivers aimed towards the front and back of the room to achieve a diffuse soundfield like that created by the multiple surround speakers used in movie theaters. Your rooms acoustics will effect these designs more than conventional direct-radiating speakers, which, when placed properly, can also make effective surround speakers.
19. Why does my Dolby Digital decoder provide time delays?
為何我的杜比數位解碼時間延遲
Because the surround speakers in a home theater system are usually closer to viewers than the front speakers, both Dolby Digital and Dolby Surround Pro Logic playback require a split-second electronic delay of the surround channels.
In the case of Dolby Digital, the delay ensures that the viewer hears sound from the surround and front speakers simultaneously. For Dolby Surround Pro Logic, which has less inherent channel separation than Dolby Digital, a slightly longer (by 15 milliseconds) delay ensures that sound from the surrounds arrives just after sound from the front. This delay reduces the audibility of sound leakage from the front to the surround speakers.
Some Dolby Digital decoder units also provide an adjustable center-channel delay to ensure that the viewer hears sound from all three front speakers simultaneously.
20. How to I set the surround time delays?
我要如何設定環繞的延遲時間? (JASON LIN兄這個你好像有問到)
The time delays in your Dolby Digital decoder are preset to provide good results in most home theater installations. If you wish to fine-tune the adjustments, consult the decoders instruction manual.
Most units allow you to adjust the surround delay in either the Dolby Digital or Dolby Surround Pro Logic mode. Because the relationship between the two delays is fixed, you only need to set the delay in one mode. The decoder will automatically provide the appropriate delay whenever you switch to the other mode.
To establish the proper surround delays for your system, you need to know the distances between your viewing position and a front speaker (A) and a surround speaker (B) as shown in Figure 20-1. Then, using Figure 20-2 (Dolby Pro Logic mode) or Figure 20-3 (Dolby Digital mode), find the distance to the surround speaker on the graphs vertical axis, and the distance to the front speaker on the horizontal axis. Lines drawn from these points will intersect on the graph at the recommended delay setting.
21. How do I set the center channel time delay?
我要如何設定中至喇叭和左右聲道的延遲時間?
You need no center delay (set it at "0") if your seating area is small with a few viewers at any time, and if you can place the three front speakers equidistant from it as shown in Figure 21-1. If the center speaker must be placed more in line with the left and right speakers as shown in Figure 21-2, thereby bringing it closer to the viewers than the left and right speakers, add 1 ms of delay for each foot it is closer. For example, if dimension C in Figure 21-2 is one foot less than L or R, set the time delay to 1 ms.
If your seating area is wide, with several viewers in a row as in a movie theater, its best to place the left, right, and center speakers all in line as shown in Figure 21-3 and use no center time delay.
Finally, if it is necessary to place the center speaker further back than the left and right speakers (not illustrated), select "? ms" (for a one foot difference) delay or "? ms" (two feet) delay, if these options are provided. If they are not provided, use "0" delay.
22. What is the "Midnight Mode" on my new Dolby Digital A/V receiver?
如何在我的杜比AV接收機上設定深夜模式?
(想知道如何決定總音量大小的必看)
Dolby Digital soundtracks can have a very wide dynamic range between soft and loud sounds. At a full playback level, this can be thrilling, providing a truly theatrical experience, particularly for movies.
Late at night, however, the loud sound effects on movie soundtracks might not be appreciated by your family or neighbors. But if you turn down the volume to "keep the peace," the dialogue will be hard to hear, and subtle low-level effects may get lost altogether.
What youd really like to do is turn down the volume on just the loud effects, turn up the volume on quiet sounds, and keep the dialogue at the same level. This is what a Dolby Digital feature called Dynamic Range Control does. For lower-level listening, it applies dynamic range compression that preserves low-level sounds, prevents dramatic passages from getting too loud, and keeps dialogue intelligible. To help explain its function, manufacturers of Dolby Digital decoders have come up with names like "Midnight Mode" for this feature. See Figure 22-1.
The amount of compression is not arbitrary, but is decided in advance by the soundtracks producers, and coded right onto the soundtrack. For example, if theres a loud sound coming from the left surround thats meant to startle the audience, the soundtrack mixers might indicate less compression for that sound than other loud sounds when the Midnight Mode is switched on.
Some Dolby Digital decoders let you select various amounts of the available compression (e.g., 50%, 75%, 100%), while others provide only 100% when the compression mode is selected.
由於網頁用JAVA寫的除了圖片還有解說,只有圖片時怕會看不懂請自行前去觀看!
以下是提到C-L(R)-S的參考音量差!http://www.dolby.com/tech/whtppr.html
2.1. Concept of Active DecodingDirectional Enhancement
Passive decoders, as noted earlier, use a simple differential stage to extract the surround signal from the left and right input signals. The decoders maintain high channel separation across the front, but localization is proper only within the particular seating area where a phantom-center image is effective. Furthermore, even with the effects of surround channel processing, it is not possible to obtain a total degree of isolation from front to back since the surround speakers reproduce any difference information in the Lt/Rt composite. It is due to these factors that passive decoders are limited in their ability to place sounds with ultimate precision for all viewing positions.
Directional enhancement is a term referring to any technique that attempts to remove the effects of the matrix system crosstalk by manipulating the output signals of the decoder. Its goal is to create sharply focused sound images and to recreate directional cues covering a wide listening area. An active decoder can most easily be thought of as a passive decoder followed by an enhancement circuit. To illustrate the concept, we will first describe the simplest technique for directional enhancementgain riding. Fig. 6 shows how the gain of each output is varied with a voltage-controlled amplifier (VCA).
Consider the case where a single sounddialogueis present in the center channel (Lt=Rt). The passive decoding map in Fig. 4 shows that the center output will carry the dialogue, but so will the left and right outputs only 3 dB down. With control circuits, the decoder can decide to eliminate the unwanted dialogue leakage by turning down the gain of the left and right speakers, leaving only the desired center output audible. The same procedure may also be used to isolate the left channel output by turning down the center and surround outputs when only an Lt input signal is present. In fact, for an input signal encoded at any position in the 360-degree circle, the separation can be completely restored with this simple method to equal that of a discrete four channel system.
Fig. 6

Fig. 4

|
|