新手上路
五星級會員
- 舊站積分
- 24833
- 舊站發表文章數
- 7074
|
樓主 |
發表於 2010-2-6 00:17:21
|
顯示全部樓層
Some useful info:
Mastering houses and pressing plants:
"TLM" / "TLM-S" / "TLM-M" / "TLM-X" = The Mastering Lab (Los Angeles) -- one of the best pressing plants ever.
(The Mastering Lab apparently used three lathes to help speed up the cutting process since they were a pretty busy outfit back in the 1970's and into the 1980's. The "M" lathe was the master and the "S" was a slave. I'm not sure, but I'm guessing the "X" lathe was a slave as well.
Of course, it still boils down to judging on a pressing-by-pressing basis given stamper wear and whatnot, but IME, the "M" lacquers often seem a smidgen better. Nothing to fuss over too much, though. I was just commenting as it's always nice to see back-to-back "M" lacquers.
It's worth noting that the lathes at TML were driven with tube amps, which is nice...and certainly *very* unique for the time. Lots of swell records cut by Doug Sax and company back in the day.)
MASTERDISK (New York) -- many of Robert Ludwig's masterings were cut here
TOWNHOUSE LONDON -- very good pressings... apparently tube gear used here
STERLING = Sterling Sound (New York) -- often very good pressings, no?
KENDUN = Kendun Recorders (California)
[BIG "S" with a small "R" inside the top loop of the "S" and a small "C" on the bottom loop of the "S"] = SPECIALTY -- often very good pressings. This plant may not have opened until '79 or so...
European pressings (where LPs cut in one country are sometimes placed in covers that list another country as the origin):
320 = GERMANY (Hanover, I believe, but possibly Hamburg )
420 = ENGLAND (only for POLYDOR ?)
670 = HOLLAND (only for EMI ?) |
|