忘記密碼
 立即註冊
查看: 653|回覆: 16

The PS Audio Video Lens !ABBY進來看吧!

  [複製鏈接]

1256

主題

1萬

回帖

200

積分

新手上路

五星級會員

舊站積分
557
舊站發表文章數
11806
 樓主| 發表於 2001-7-2 06:44:10 | 顯示全部樓層

The PS Audio Video Lens !ABBY進來看吧!

[h1]The PS Audio Video Lens [/h1]


The Video Lens is so named because it perfectly describes its function: that of focusing any video source into a near perfect output.  Designed by Aerospace scientist Doug Goldberg, the PS Audio Video Lens is a major breakthrough in high-end video performance.

Regardless of the quality of the video source, the PS Audio Video Lens will take input in the form of S-video, Component video, or RGB video, re-synchronize, re-construct, and then output a perfect version of the input with no frequency or temporal distortion.

The results are breathtaking.  Absolute sharpness of picture, no smearing, deep rich colors with enhanced chroma and luminance channels, and the ability to drive and actively correct for virtually any length of video cable or any impedance presented to it.

The Video Lens features:

Universal Transcoding: (Component to RGB or RGB to Component)
Re-timing of component chroma and luminance channels
Individual band rejection filters for RGB/Component, and S-video paths
Automatic cable length and impedance matching and compensation circuitry
Signal reconstruction of either RGB, Component, or S-video inputs
Optional remotely powered video cable and reconstruction control box
350 MHz bandwidth
Input switching
Integrated PS Audio Power Plant Technology
Integrated PS audio Ultimate Outlet
Remote control capable
Panja, MTX, CAN communication ports
Transcoding
99% of currentDVD players have Component output.  The DVD specification supports disks with both video and audio that have capacities of from 4.7GB to 17GB and access rates of 600KBps to 1.3 MBps.  A DVD's high resolution video output is called Component video and is, to date, the highest bandwidth video medium we have and commonly thought of as state-of-the-art in video reproduction.  Many of the latest RPTV's (Rear Screen Projector TV's) and televisions of today have Component in, but most front projectors and most high-end monitors do not.  The vast majority of front projectors and many RPTV's still have RGB in (Red Green Blue as separated channels).  Transcoding from component to RGB is therefore necessary to make the units compatible with the output of most current DVD players.

Most Set Top Boxes (STB), which receive satellite or terrestrial HDTV signals, have only an RGB output.  Because many of the new sets coming out today have only a component input, a transcoder is also needed to convert the two formats.  

The requirements of a transcoder are the accurate conversion of one format to the other, and perhaps just as important, maintaining the full bandwidth of these signals to avoid aberrations in the frequency response of these signals.  There are a small number of commercially available Transcoders on the market today, but these are typically bandwidth limited devices that may degrade the video signal.

In a high-end video environment, maintaining full bandwidth during any conversion process is absolutely critical.  The PS Audio Video Lens has an extraordinarily high 350 MHz bandwidth.

Re-timing and re-clocking of component chrominance and luminance channels
S-video differs from component video.  Short for Super-Video, a technology for transmitting video signals over a cable by dividing the video information into two separate signals: one for color (chrominance), and the other for brightness (luminance). When sent to a television, this produces sharper images than composite video byavoiding the need for a comb filter to separate these signals.  This is because televisions and projectors are designed to display separate Luminance (Y) and Chrominance (C) signals. (The terms Y/C video and S-Video are the same.) In composite video the Chroma (Chrominance) and the Luminance channels are combined, in S-video they are separated.

The timing between the chroma and the luminance channels is critical.  Typically measured in nanoseconds, any timing error between the two channels greater than 4 nanoseconds can result in visible smearing of the picture.

The PS Audio Video Lens takes S-Video in and re-synchronizes the chroma and luminance output such that timing errors are minimized. Therefore, regardless of the timing error of your S-Video source, the Video Lens will re-synchronize the two channels into perfect temporal alignment .

Powered video cable and reconstruction control unit
While the PS Audio Video Lens is capable of driving video cables as long as 100 feet, thanks to its exclusive cable compensation circuitry, for those demanding an absolutely perfect reconstruction of the video signal at the viewing device itself, we offer the remotely powered video cable extender, or VCE for short.

The optional VCE takes the selected output of the Video Lens, passes it through virtually any length of PS Audio Video Link Cable, and is received at the other end in the optional reconstruction control box.

Inside the reconstruction box, which sits within a few feet of the television, is a circuit similar to the Video Lens itself.  This circuit includes reconstruction buffers, reclocking circuitry for S-Video, and another impedance matching system.

The control box itself is powered remotely through the special PS Audio Video Link cable, which can be virtually any length.

You can use the VCE to power another video setup as well.  In this case, you would use the normal video outputs of the Lens to power either your main system or an auxiliary system, and the VCE to power another second system.

Band rejection filter
In both S-Video and Component video, it is critically important to pass the full bandwidth available, yet equally important to filter and reject out-of-band noise and harmonic components.  

For instance, a high definition RGB or component signal has the highest bandwidth requirements of any signal and therefore quite sensitive to RF (Radio Frequencies) interference.  Because the Video Lens is capable of an unprecedented flat frequency response of 350 MHz, to accommodate S-Video. HDTV and Component signals, we have gone to great lengths to minimize RF interference as received from the AC line or from airborne sources. Careful PC board layout with all surface mount devices was a critical component in this quest for video purity, as was our band rejection filter.  This issue was so important, that we hired world-renowned engineer John Levro to design the PC board layout.

The PS Video Lens has individual active band rejection circuitry, and a built in AC power regeneration device that eliminates any out of band noise in both Component and S-Video signals regardless of their source.

Active load and cable length measurements
S-Video has a maximum bandwidth of approximately 4.5 mHz.  The frequency response pass-band is critical for the sharpness of the picture. In fact, if you examine the sharpness control functions on any video processor or television, it usually involves manipulation of the frequency response of the signal.  To increase the picture's sharpness, the controls "peak" the video signal.  This means that the signal is exaggerated in amplitude at a specific frequency.  

The problem then lies in making sure that the amplitude of the video signal and its frequency response remains intact.

The PS Video Lens solves that problem with a unique sinx/x circuit that actually measures the length of the cable it is connected to, and the impedance of the load, sends the information to an on-board computer for processing and then actively compensates for this loss or variance.  By maintaining perfect bandwidth, and synchronized chroma and luminance signals, the Video lens completely eliminates smearing and loss of sharpness of the video picture, regardless of the quality of the source or the length of the video cable.  Runs of over 100 feet can easily be accommodated.

Signal reconstruction of either RGB, Component, or S-video inputs
The purity of the video signal signals is critical to picture quality.  Regardless of whether the video signal is RGB, Component, or S-Video, the Video Lens will take the signals in, reshape and clean the noise from any embedded synch signals (found either in the G or Y channel), and re-output the video first through the band rejection filter, then into our sinx/x measurement system that measures the active load impedance and cable length.

This entire chain will help produce a near perfect video output, regardless of what the source quality is.

350 MHz bandwidth
Using high speed technology unusual in any consumer designs, the Video Lens is flat to 350 MHz.   By comparison, you only need 50 MHz to pass HDTV.  Other consumer devices on the market don't support bandwidths of more than 75 MHz, so while they'll work with HDTV, their maximum bandwidth limits are uncomfortably close to the television or projector's operating point before line doubling, tripling, or quadrupling.  

We believe the delicate nature of high-end video signals, particularly HDTV, needs this extra bandwidth for un-compromised performance.   

The same as the broadcasters use
The only devices on the market that have similar bandwidth are the broadcasters, video to film production studios, and television stations that broadcast HDTV.  The ultra-wide bandwidth achieved by the Video Lens will be a first in a home theater environment and will set the standard by which others will aspire to.

Video Switching
The PS Audio Video Lens is capable of handling component, S-Video, HDTV, RGB inputs and switching between them has never been easier.

Using the front panel controls, you may switch to any of the available inputs, or you may transcode Component to RGB or RGB to Component.

Clean video is just the beginning
Of course the circuitry and technology used inside the PS Audio Video Lens are the latest, state of the art devices.

But as PS Audio has shown for several years now, powering the device is equally important to the quality of the picture.  Further, because of the extraordinarily high bandwidth of the Video Lens (operating in the RF region) any interference or noise products that enter the Video Lens can cause visual degradation.  There are two sources of noise, through the AC power input and through the air.

Inside each Video Lens is first a PS Audio Ultimate Outlet, and secondly, a PS Audio Power Plant.  Between the two of these devices, rejection of noise and interference on the AC line approaches 100 dB at any frequency above the fundamental of 50/60 Hz.

The Ultimate Outlet
The Ultimate Outlet is based on balanced construction for its operating mode.  Consequently it can reduce common mode noise by more than 40 dB without any loss of power.  This major cleaning effort by the Ultimate Outlet will take place not at just very high frequencies, like a typical power filter or conditioner, but at virtually all frequencies presented to it.  

Once the signal has passed through the Video Lens internal Ultimate Outlet for cleaning, it then goes to the internal Power Plant.

The Power Plant inside
Much has been written about the PS Audio Power Plant AC regenerators.  In fact, they have become the de-facto standard in AC reconstruction throughout the world.

The PS Audio Video Lens will be the first of many products developed by PS Audio that has a built-in Power Plant to operate the internal electronics.  The Power Plant electronics will lower noise, eliminate waveform distortion by 70 dB, and will regulate the AC voltage, regardless of input level, by 1/10th of a volt or put another way, regulation is 0.0001% of line.

The built-in Power Plant on the Video Lens is a full Power Plant with a specially generated MultiWave pattern that is designed specifically for best operation of the Video Lens.

Panja, MTX, CAN and remote control communication
In a home theater environment, or any environment where the system's complexity is controlled through a home automation interface, the PS Audio Video Lens is completely compatible. If your home automation system uses either of the industry standards created by Panja or MTX, an optional card can be installed into the Video Lens that allows any of the Video Lens features and function to be accessed remotely through your existing home automation interface.

The CAN system is a third interface available on the Video Lens and it is integral to the Video Lens itself.  The CAN system allows communication between PS equipment and can provide remote turn on/off, transcoding selections, input selections of video sources, and eventual communication to the outside world for programming and diagnostics amongst other possibilities.  

A remote control sensor and computer interface is also included with each Video Lens.  We will soon be offering an optional remote control transmitter device that will "speak" with the Video Lens system via infra red.  The hand-held remote control unit will allow access to all features and functions found in the Video Lens system.

This is the Ultimate video interface
The PS Audio Video Lens is the final link between your video sources and your viewing interface. Whether you require its transcoding features, or simply wish to enjoy the visual benefits of a perfectly reconstructed video signal, the PS Audio Video Lens will represent the ultimate video interface.


--------------------

SLEEPLESS IN SEATTLE

--------------------

被 SleeplessInSeattle on 07/02/2001  07:13:58

被 SleeplessInSeattle on 07/02/2001  08:07:53

1256

主題

1萬

回帖

200

積分

新手上路

五星級會員

舊站積分
557
舊站發表文章數
11806
 樓主| 發表於 2001-7-2 06:44:33 | 顯示全部樓層
http://www.psaudio.com/Video_Lens/body_video_lens.html

--------------------

SLEEPLESS IN SEATTLE

--------------------

49

主題

949

回帖

0

積分

新手上路

JUST DO 蕊

舊站積分
1
舊站發表文章數
889
發表於 2001-7-2 07:13:00 | 顯示全部樓層
不知道那位可以翻譯的.....
>____<


◤青春不瞎矇    瞎矇就空空空◢      
㊣ggman㊣

1256

主題

1萬

回帖

200

積分

新手上路

五星級會員

舊站積分
557
舊站發表文章數
11806
 樓主| 發表於 2001-7-2 07:22:49 | 顯示全部樓層
簡單說可色差轉RGB,或RGB轉色差

--------------------

SLEEPLESS IN SEATTLE

--------------------

695

主題

1萬

回帖

0

積分

新手上路

快樂阿比兄

舊站積分
10693
舊站發表文章數
12102
發表於 2001-7-2 09:16:18 | 顯示全部樓層
價格呢??不會也貴的嚇死人吧!?

1186

主題

1萬

回帖

0

積分

新手上路

五星級會員

舊站積分
151
舊站發表文章數
11330
發表於 2001-7-2 09:25:39 | 顯示全部樓層
樣子長的很貴...


阿~~~~~~伊~~~~~~西~~~~~~打

49

主題

949

回帖

0

積分

新手上路

JUST DO 蕊

舊站積分
1
舊站發表文章數
889
發表於 2001-7-2 09:37:24 | 顯示全部樓層
轉貼~~

Audio Authority即將推出新產品
Component to RGB video converter
可以將色差訊號轉成RGB訊號,只要有Monitor就可以了.
對於沒錢買高級電視的玩家將是一個不錯的選擇.
附贈一條D-Sub 15pin VGA端子 to 五線式(RGBHV)的BNC cable

RGB模式有三種可調:
R,G,B,H-Sync,V-Sync
R,G,B,Composite-Sync
RGsB (Composite-Sync on Green)

目前的資訊只有提到480P,並未提到480I,1080I,720P,
不過根據敘述,這個轉接器是直接將同步訊號輸出,
不做降頻或升頻的工作,所以Monitor能接受的頻率都可以.
因此480P,1080I,720P的訊號一般Monitor絕對綽綽有餘,
比較麻煩的是480I的,因為能吃水平15KHz的Monitor不多,
所以想用這產品來玩PS2的人請先注意自己的Monitor...
呵呵,最近超哈BS Digital,有這東西就不用花大錢買電視了,
把Tuner訊號固定在1080I就能用Monitor欣賞高解析的節目囉~
價格不貴,比RGB-2便宜.

請參考http://yourdigitalhome.com/dss4u/aa9a62.html
目前Audio Authority網頁還沒有此產品的資訊,
應該過一陣子就會有了.



◤青春不瞎矇    瞎矇就空空空◢      
㊣ggman㊣

62

主題

552

回帖

0

積分

新手上路

三星級會員

舊站積分
0
舊站發表文章數
609
發表於 2001-7-2 11:38:06 | 顯示全部樓層
基本上PS Audio Video Lens是一台非常overkill 的transcoder (S-video, 色差與RGB),包括電源再生,訊號再生,強大的輸出驅動能力(以便連接超長的電纜),超寬的頻寬,以及遙控能力.我記得MSRP是1,500美元.因為PS Audio採網路直銷的模式,如果相同的產品採用傳統銷售通路,定價可能達其兩倍.

695

主題

1萬

回帖

0

積分

新手上路

快樂阿比兄

舊站積分
10693
舊站發表文章數
12102
發表於 2001-7-2 12:01:17 | 顯示全部樓層
非常強的弁,非常貴的價格...

噁~...Mitsubishi D-2001還是比較可愛....,畢竟RGB轉色差有點像拖褲子放屁,偶也用不到說...

1186

主題

1萬

回帖

0

積分

新手上路

五星級會員

舊站積分
151
舊站發表文章數
11330
發表於 2001-7-2 13:11:20 | 顯示全部樓層
何時才有便宜的訊號解碼切換器啊..我只想要有色差和RGB輸入..然後RGB輸出....
一天沒買到.我一天不想玩.HTPC..[!]
我可不想讓八條線在牆上跑......[V]


阿~~~~~~伊~~~~~~西~~~~~~打
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-19 10:44 , Processed in 0.082805 second(s), 41 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表