新手上路
Digital = Simplicity
- 舊站積分
- 30
- 舊站發表文章數
- 1976
|
Gentlemen,
Bought my engineering unit of Momitsu V-880 for five (5) long months, during four (4) times of firmware upgrading, finally with the newest firmware Version 102203, my V-880 really pleases me now by enabling CUSTOM RESOLUTION SETTINGS menu.
Hooking up Z1 and V-880 with a 10 meter DVI-I cable to V-880 and a DVI-I/VGA adapter to Z1. My setting goal is to achieve 3:3 PULL-DOWN and 1:1 MAPPING at 540p (960x540, the native pixel array of Z1).
Since the NTSC DVD editted for V/F 59.94Hz 3:2 PULL-DOWN, I calculated like that:
59.94 / (3 + 2) = 11.988 frame generated by DVD per second
11.988 x 6 = 71.928 (V/F for 3:3 PULL-DOWN)
71.928 x 563 (Vertical Synch. Total) = 40.495 KHz (H/F)
Using PowerStrip Settings for 540p, I set the 9-7-1-3 CUSTOM RESOLUTION SETTINGS menu as follows,
H/F 40495 V/F 7193
VideoWidth 0960 VideoHeight 0540
HSyncTotal 1104 PreHSync 0016
HSyncActive 0032 PostHSync 0096
VSyncTotal 0563 PreVSync 0002
VSyncActive 0006 PostVSync 0015
HSyncPolarity 0000 VSyncPolarity 0000
Regarding Z1 settings: PC mode (VGA): Wide Thru
Fine Synch: 6
Total : 1112
Horizontal : 140
Vertical : 24
The overall picture quality were improved dramatically, as,
1. Most of shimmers on dark area, mosquito noises on bright area, horizontal scaling strip noises, vertical synch strip noises,....
are reduced 75% at least (just my feeling with my eyes only).
2. Colour saturation is much more vivid than ever.
3. C/R improvement, I can't figure out why, maybe caused by S/N improvement.
These are just my primary observation, I'll do a test with AVIA dvd to verify. But I'm damned sure I got my simplified HTPC, my baby. "All shall Love me and Despare." -- Queen of Elves, LOTR
Now my restless heart can rest for awhile (until MicroSoft WMV9's launching out sometime next year 1st Qt, I'll stick to my Z1 and V-880), I'v got a reason to resist the temptation from AE500, Z2, HS20, H56, PE6800,.......
Regards, Peter
By the way, please may somebody more knowledgeable share us your V-880 custom resolution settings parameters and regarding Z1 settings.
Strongly recommend some of my fellow members who aready have V-880 but don't have a DVI-D display or the current v-880's DVI setted formats don't fully work well with your display, the CUSTOM RESOLUTION SETTINGS is a MUST try function. |
|