新手上路
初級會員
- 舊站積分
- 0
- 舊站發表文章數
- 40
|
樓主 |
發表於 2003-12-15 13:45:07
|
顯示全部樓層
原發表者是 Peter Caesar
[B]Don't know which PDP you are using, but I guess it's V-tek 42W5.
And it's funny that V-tek 42W5 using one of the today's best deinterlacing/scaling chip, DVDO 504 chip (same chip used in H30, 56, 76 of Optoma; PE8700 and 6800 of BenQ), but it deinterlacing capability is a joke - the worst of the HD display. That means when you input ordinary TV signals (NTSC 480i and PAL 576i via both composite and s-video), you'll find the picture quality is unacceptable. That's why most of the CE stores suggest the customers who bought V-tek W5 to buy Zinwell to deal with ordinary TV signals ONLY, not to deal with 480p above YPbPr component or RGB via Dsub-15pins.
To RGB sources you should use VGA connection to by pass the Zinwell; to 480P (or above) proscan signals you should connect the sources DIRECT to your PDP. Any unnecessary scaling will do no benefit but harm to the picture quality.
To both composite and Y/C separation video signals, yes, this is what you need a Zinwell for. As to what you questioned "via VGA or Component", it's a garbage-in garbage-out situation, I don't think it will have any noticable difference as long as the cables are decent and your PDP is well calibrated; and the VGA may win out with a hair at long distance transfering, and the component cable also cheaper. On the mean time, try to use a AVIA or VE dvd to find out.
I don't want to spoil your fun with Zinwell, but the device is not as good as what the advertisement mentioned. There exists some issues, i.e., Chroma Bug, Chroma Delay, 2:2 pulldown failure, Black Level, Color Saturation..... I hope you bought the revised new unit with upgrade IC and new Firmware, which may had solved some of the problems.
Do a search on http://www.AVSFORUM.com at VIDEO PROCESSOR page, there are tons of discussions regarding Zinwell ( AVT-3700 in US).
Good luck, Peter
BTW, I'm no user to both Zinwell and V-tek PDP; what I said were based on what I learnt from the forum and my personal understanding with scaler and PDP. [/B]
Hi Peter,
My PDP is Hitachi 42PMA400A (monitor only), the problem I met was CATV image saturated (like a disaster) even tried to adjust contract, tint and brightness while input CATV signal thru Sony VCR as a TV turner. But Zinwell Brite-View has significant improvment, amazing! That's why Zinwell is a mandatory option in my system now!
BR/Jack |
|