新手上路
三星級會員
- 舊站積分
- 1587
- 舊站發表文章數
- 858
|
樓主 |
發表於 2015-5-20 13:33:04
|
顯示全部樓層
YS-audio REFERENCE ONE MKII PHONO




Specifications
Controls.
Power Supply : Power On/Of .
Main Unit : Gain select, Phase Normal / Inverse , Input MC/MM , MC Gain High/Low , MC Input 1 or 2.
Output : 1 pair Main XLR , 1pair Main RCA.
Input : MC1 input with RCA , MC2 input with RCA , MM input ( all RCA ).
Output Impedance :
600 ohms ( XLR and RCA same ) , 600 ohms minimum load.
Frequency Response: +/- 0. 2dB 20Hz to 20KHz , RIAA equalized
Input Impedance:
MC low gain:
DC Impedance 12ohm ( for 7 ~ 40ohm internal DCImpedance of MC cartridge )
Zi Impedance 200 ohm ( for load Impedance over 100 ohm MC cartridge )
MC high gain:
DC Impedance 3ohm ( for 2 ~ 7ohm internal DC Impedance of MC cartridge )
Zi Impedance 50 ohm ( for load Impedance over 20 ohm MC cartridge )
MM is 47K / 100P ( the capacitance impedance can change by module )
Gain:
1 is Low MC 72.5dB / High MC 78.5dB / MM 49dB ,
2 is Low MC 71.5dB / High MC 77.5dB / MM 48dB ,
3 is Low MC 69.5dB / High MC 75.5dB / MM 46dB ,
4 is Low MC 67.5dB / High MC 73.5dM / MM 44dB ,
5 is Low MC 66dB / High MC 72dB / MM 42.5dB ,
6 is Low MC 62.5dB / High MC 68.5dB / MM 39dB ,
Noise: MM 90.5dB (shorted input) , MC 90dB (shorted input).
signal-to-noise ratio, below 1 Volts RMS output, A weighted
Phase Mode : Normal / Inverse.
Max input : MM 80mV , MC 8mV
Distortion: Less than 0.2% at 2.8V RMS 1kHz output.
Tube Compliment : 12AX7 x2, WE396A x2, 5687WB x2, EZ80 x2.
Dimension:
Main unit , 455mm x 350mm x 120mm (W x D x H)
Power Supply ,400mm x 310mm x 80mm (W x D x H)
Total Weight: 23kg
Power Source: 110-127/220 - 240V,50/60Hz
|
|