新手上路
二星級會員
- 舊站積分
- 204
- 舊站發表文章數
- 443
|
發表於 2020-3-31 20:48:54
|
顯示全部樓層
當年(2006) TODD WELTI 所下的CONCLUSION 節錄給看倌們參考
CONCLUSION
The various investigations described in this paper sug- gest the following approaches for different situations:
1) Rectangular room, dimensions unknown, or no measure- ments available, seating area in center of room or between center and rear: use standardized positional optimization.
2) Rectangular room, dimensions known, no measure- ments available, seating area in center of room or between center and rear: use Figs. 6 or 7 to select either the best subwoofer configuration or the best combination of sub- woofer configuration and room dimensions (better).
3) Subwoofer-to-seat measurements and DSP hardware with high-order filters available: use filters based on matrix inversion or adaptive techniques, or use SFM solutions.
4) Subwoofer-to-seat measurements available and DSP hardware limited or unavailable: use SFM solutions.
SFM has been shown to have several advantages over other methods. It performs better than using standardized locations only (such as wall midpoints). It may be simpler to implement than complex FIR filter–based techniques. The performance of SFM compared to FIR filtering is the sub- ject of continued investigation, though preliminary indica- tions are that they perform similarly on average. The use of SFM allows the user to look at a number of the best solu- tions and pick the one most suited to a specific need, rather than simply calculating one and only one solution. Since it is based on a grid-search algorithm, SFM could be imple- mented simply as a series of nested loops. Adding a bit of intelligence, for example, eliminating redundant level and delay combinations, improves performance considerably.
1.以上的空間室型主要為矩形。
2.圖爾博士2008年版的書中,就有引用這篇的內容。
3.REW作者,很可能有受此篇文或圖爾博士之書的啟發或影響,因此有設定快速中點與快速角落的設定。 |
|