新手上路
五星級會員
- 舊站積分
- 24833
- 舊站發表文章數
- 7074
|
發表於 2009-10-6 11:05:58
|
顯示全部樓層
原發表者是 hsindao
[B]... Talked to him several times on the phone regarding that subject but was always clueless on what he was talking about. +3.
[/B]
多謝!其實那時候我也講不清楚。[ ]
看了 Colin 的回覆才讓我恍然大悟。因為我一直被 壓力 <-> 音量 的偏見牽著跑,所以雖然觀察裡不是音場偏哪一邊的問題,可是腦子裡卻轉不過來, Colin 一說,我就清楚了。可見人的偏執對理性思考影響之巨大。
關於 Hi-Fi News test LP, vinylengine 有這樣的介紹
Bands 6 + 7 + 8
Bias setting (300Hz tone L+R at +12dB / +14dB / +16dB)
These tracks are for setting anti-skate. If the 300Hz test tone is heard distorting or buzzing on either channel then your 'anti-skate' or 'bias compensation' should be adjusted to compensate. Most cartridges seem to sail through the first track regardless, but fine tuning will be needed to successfully complete the 14db and 16dB tracks. Increasing VTF towards the top end of the cartridge manufacturers scale can improve tracking here.
It's interesting to note that advanced stylus profiles like the Gyger S on the Goldring 1042 have a smaller 'sweet spot' during bias adjustment . A Goldring 1006 and Audio Technica AT110E where equally indifferent to bias setting over a larger range of the scale and where unable to track the final band as well the 1042.
但是我在 vinyl asylum 看過也有很多人無法通過最後一段的測試,而通過測試通常不是針壓加得很大就是抗滑加得很大,顯然兩者都有問題,不知道各位有沒有其他相關資料? |
|