新手上路
二星級會員
- 舊站積分
- 24
- 舊站發表文章數
- 254
|
發表於 2006-9-22 23:40:45
|
顯示全部樓層
The " remium Line" (hereafter PL) drivers are indeed very good, but
they are two generations behind the TD line with the Apollo motor
upgrade. If you are interested only in using them as subwoofers or
low-bass in a large three-way, the PL drivers will exceed the sound
quality of most other options. They are not however capable of the
extreme SPL of offerings from e.g. Adire Audio.
The ones I have are equipped with straight-sided polypropylene cones
and dust caps, which makes them quite rigid, and very durable. This
is good for the subwoofer application, as it allows them to be driven
hard in small (Linkwitz-transform equalized) boxes without losses
from the cone flexing, but is not good for midrange frequencies.
The TD or "Tube Driver" line was optimized an additionally engineered
for wide-band use well into the midrange. All featured curvilinear
paper cones modeled after a classic Altec design, enhanced with a
specialized damping compound, as well as phase plugs, a lower
inductance motor, a more open basket with less back-wave reflection,
and high efficiency.
All of those features are important at midrange frequencies, but do
little to improve low-bass performance. Since the curvilinear paper
cone is designed to have some flex in a controlled fashion
(progressively decoupling the outer edge of the cone as frequency is
increased, thereby improving both frequency and dispersion
linearity), this feature may actually be disadvantageous if the
driver is used in an equalized small-sealed-box alignment. Also, the
higher efficiency parameter requires a larger box and/or higher
frequency roll-off, or equalization.
The Apollo upgrade was the final released design, and the culmination
of Lambda Acoustics motor design. It added two more large Faraday
devices to further contour and stabilize the magnetic gap flux,
decrease inductance to a vanishingly low value (better than many
midrange drivers), and increase thermal dissipation and power
handling to extreme levels. A Kapton wrap was added over the upper
end of the aluminum voice coil former to assist with the latter
benefit. There were other changes I believe, that were either not
disclosed or have passed beyond my recollection, but these were the
most significant.
The extraordinarily low inductance, linear, high efficiency and deep
power handling, combined with an excellent damped-paper cone, and
completed by long excursion and deep power handling, make these
drivers unexcelled for wide band use. The Apollo changes benefit the
driver's performance for bass and midrange, and most importantly, for
both at the same time. They can be crossed much higher than any
other true woofer I know of, while retaining superb sound quality.
In summary, if you are in need of a good set of low distortion
subwoofers, the PL drivers will do the job very well, but if you have
a design that will require their use into the midrange, such as an
ultimate two-way with an unconventional high frequency unit (AMT,
Manger, Unity, GedLee RSP, etc.) the Apollo units are not only a much
better option, they are I believe your best option. The "regular"
TD15 units aren't bad either.
There were other models released by Lambda Acoustics, such as a
special purpose Dipole unit, and a low-cost line without the
signature full length copper Faraday ring, but I shall not discuss
those here lest this message grow even longer. |
|