新手上路
五星級會員
- 舊站積分
- 3604
- 舊站發表文章數
- 5787
|
發表於 2017-10-19 11:33:04
|
顯示全部樓層
原發表者是 ups
[B]
如果只是看頻響的平坦度來決定那知名大廠Thiel 喇吧也不需強調"time align",REW軟體也不需出"time align"功能了,AV機自動調校也不需抓距離跟時間了...看頻響來決定一切就好啦!
只是看頻響的平坦度那2.1時超低跟中高音時間差怎辦?5.1...7.1...11.1..怎麼去訂時間的,是依那個喇叭的頻響最不平坦去訂的嗎?
下面這段吳兄你沒貼上
Many AVRs will be able to adjust the delay of each channel, including the subwoofer, so that all sound waves arrive in synchrony at the main listening position. In particular, failing to correctly adjust the delay of the subwoofer channel may introduce cancellation between the mains and the subwoofer in the crossover frequency range. Verifying this require either a good hearing and lots of experienc, or more reliably, a frequency response measurement. Frequency response measurements are not covered in this tutorial, but can be performed rather easily using an Omnimic system, or using the free Room EQ Wizard (REW) software from HomeTheaterShack and one of the many available microphones or SPL meters fit for the job. MiniDSP's own UMIK-1 microphone is particularly well-suited for the job.
\\Verifying this require either a good hearing and lots of experienc
重上面這段話〝驗證這需要良好的聽力和很多經驗〞可以感覺那不是很科學的說法,還存在著某種不確定性。 [/B]
1. 您所稱的Thiel 或REW 的time align主要看的頻域是那端呢?
低頻域在小空間的反射情況如此, 加上在minimum phase的系統下, 調整delay/distance改善主喇叭與超低音的銜接之利弊為何?
2. Verifying this require either a good hearing and lots of experience, or more reliably, a frequency response measurement.
這句的完整意思, 我的解讀略有不同
您引述這句是在陳述上面調整delay來讓crossover平坦化這事, "感覺那不是很科學的說法,還存在著某種不確定性"
而該句完整的意思應該是, 需要好的聽力與大量經驗或是, 更可靠的頻響測量來做驗證.
不止上面貼的連結, 連REW的作者John PM 也在許多的討論中推薦此作法, 連結大家都會貼, 這部份請自行搜尋便知.
3. ups兄前帖貼該瀑布圖的動機目的還未解釋喔. lai桑 前面大笑數回似乎感覺此法非正道, 願聞其詳. |
|