新手上路
二星級會員
- 舊站積分
- 52
- 舊站發表文章數
- 434
|
發表於 2007-12-19 13:34:02
|
顯示全部樓層
Ayre K1 的增益調整!
資料來源, Charles Hansen audio asylum的說明。
There is one resistor per channel that sets the gain.
The default value is 499 ohms and results in 16 dB to the balanced outputs and 10 dB to the single ended outputs.
Increasing the resistor value lowers the gain. For example changing to 1000 ohms will decrease the gain by 6 dB. Changing to 221 ohms increases the gain 6 dB.
Each resistor is mounted in a small brown terminal strip a few inches from each end of the PCB, and centered from top to bottom. Use the directions given in the owner's manual for the phono stage for details. You will need tweezers and a small screwdriver, as well as a hex key to remove the lid. If you have the phono option, just steal some of those resistors. If not, contact the factory or your local distributor and we will send some resistors at no charge.
希望對大家有幫助,音響論壇評論ayre k1的時候,也有提到高增益版本。 Charles這樣說,應該不用動到洛鐵吧? |
|