新手上路
三星級會員
- 舊站積分
- 35
- 舊站發表文章數
- 558
|
樓主 |
發表於 2009-6-25 23:04:19
|
顯示全部樓層
原發表者是 hsindao
[B]hckao2, when connecting coil wires to the contact pins, how do you decide which way is the correct phase(polarity)? That is, which wire goes to the R and which one goes to the RG, for example.
Of the cartridges I have, I found that Shure V15-IV and ZYX R-1000 Airy had the phase reversed while DL-103 and Shetler 501-II had the correct phase. It was ZYX that got me interested in the phase issue because when I got it it was lifeless until I reversed the R/RG, L/LG connections after reading on the web that it has a phase reversal. The Bartok Music for strings, percussion and celesta LP by Solti/LSO on London I just listened to also has the phase reversed. [/B]
Hi hsindao,
I'll say Faraday's law is the basic (best way) theory to determine pin assignment when a new cartridge was designed.
But, in practice, I'll:
1. To separate {R+,R-} and {L+,L-} as two group. It's easy for me. Then, connect these wires to the lead-out pins.
2. Uses a test record for further phase check. If you real care about the correct + or - phase you need a scope to help you. If not, only in-phase is required, uses your ear.
By the way, I'm reading your posted artical on the VTA.
It's my recent study. |
|