新手上路
星星月亮地球
- 舊站積分
- 0
- 舊站發表文章數
- 149
|
樓主 |
發表於 2002-1-18 11:44:13
|
顯示全部樓層
原發表者是 ups
[B]
改天將文獻找上再貼上來! [/B]
轉貼自
http://www.hr/josip/DSP/FAQ/26.html
Q2.6: What standards are there for digital audio? What is AES/EBU?
What is S/P-DIF?
The "AES/EBU" (Audio Engineering Society / European Broadcast Union) digital audio standard is probably the most popular digital audio standard today. Most consumer and professional digital audio devices (CD players, DAT decks, etc.) that feature digital audio I/O support AES/EBU.
AES/EBU is a bit-serial communications protocol for transmitting
digital audio data through a single transmission line. It provides two channels of audio data (up to 24 bits per sample), a method for communication control and status information ("channel status bits"), and some error detection capabilities. Clocking information (i.e., sample rate) is derived from the AES/EBU bit stream, and is thus controlled by the transmitter. The standard mandates use of 32 kHz, 44.1 kHz, or 48 kHz sample rates, but some interfaces can be made to work at other sample rates.
AES/EBU provides both "professional" and "consumer" modes. The big difference is in the format of the channel status bits mentioned above. The professional mode bits include alphanumeric channel origin and destination data, time of day codes, sample number codes, word length, and other goodies. The consumer mode bits have much less information, but do include information on copy protection (naturally). Additionally,
the standard provides for "user data", which is a bit stream containing user-defined (i.e., manufacturer-defined) data. According to Tim Channon, "CD user data is almost raq CD subcode; DAT is StartID and SkipID. In progfessional mode, there is an SDLC protocol or, if DAT, it may be the same as consumer mode."
The physical connection media are commonly used with AES/EBU:
balanced (differential), using two wires and shield in three-wire microphone cable with XLR connectors; unbalanced (single-ended), using audio coax cable with RCA jacks; and optical (via fiber optics).
"S/P-DIF" (Sony/Philips Digital Interface Format) typically refers to
AES/EBU operated in consumer mode over unbalanced RCA cable. Note that S/P-DIF and AES/EBU mean different things depending on how much of a purist you are in the digital audio world; see the Finger article below.
References:
Finger, Robert, "AES3-199X: The Revised Two Channel Digital Audio Interface (DRAFT)", presented at the 91st Convention of the Audio Engineering Society, October 4-8, 1991. Reprints: AES, 60 East 42nd St., New York, NY, 10165.
[The above from Phil Lapsley, phil@ohm.Berkeley.EDU, and Tim Channon, tchannon@black.demon.co.uk] |
|