新手上路
二星級會員
- 舊站積分
- 38
- 舊站發表文章數
- 219
|
樓主 |
發表於 2011-9-20 09:15:09
|
顯示全部樓層
Re: Re: Re: Re: 請教有使用Mark Levinson 6B 唱放的前輩
感謝前輩
以下連結似乎也提到L3A無法對應低輸出MC
http://hifi.gxcnc.net/hifihifiav ... m=6&indextype=1
然原廠昨晚的回覆還是堅持L3A可以對應0.2~0.3mV
請參考下面貼文
ML7 owners manual for information on the L3 and L3A phono options:
- The L3 was the highest gain phono option and could be used with cartridges with an output of .2 mV or less.
- The L3A was intended for use with cartridges with an output between .2 and .3 mV, so it should be compatible with your cartridge, although you may need to turn the volume up a little more.
阻抗對應還是重提如下
The 5 pin Fischer connector that can be used for externally loading the phono cartridge
問題是真的組抗能改善增益不足?
我先平靜一下子因為若是不滿意LP能給我的愉悅那再投下一顆高輸出唱頭只會讓我更難過
感謝以上指導過的前輩
我若有疑問再上來
|
|