忘記密碼
 立即註冊
樓主: Ken Wu

IMAX Enhanced 相關消息

[複製鏈接]

226

主題

6231

回帖

100

積分

新手上路

五星級會員

舊站積分
3604
舊站發表文章數
5787
 樓主| 發表於 2018-9-22 03:15:46 | 顯示全部樓層
引用來源 (Imax enhanced event in CEDIA)

A few more tech details I clarified / learned about IMAX DTS at the AVS event tonight where I got to ask some more tech nerd questions... also nice to see some AVS people in person like Sanjay, RayJr, DSchultz among others....

1. Corrected: The HDR actually won』t be proprietary as I initially assumed, rather it will be HDR10, but specially graded / mastered according to IMAX standards.
If the display is also IMAX Enhanced, in addition to the performance certification stuff, it will also lock into a special IMAX picture mode when it detects IMAX enhanced content as the input signal... a non IMAX display will just display it as standard 4K HDR10.

2. Confirmed: The video will also include IMAX』s proprietary sharpening / noise reduction technology they use in IMAX cinemas, called DMR.

3. Clarification: The DTS:X immersive audio will be 7.1.4 with one static object for the Center Height channel.
So until (if?) DTS can do more than 11 channels it will play as 7.1.4 DTS:X with a phantom CH channel.
The interesting part — the DTS guy said it would not just be a phantom center in between the FH L/R speakers but also the *center channel* would be used
to create the phantom image (presumably to pull the phantom CH forward to the top of screen position as in commercial IMAX 12ch, since the FH speakers in IMAX 12ch are more overhead, not like Auro3D where they are on the same plane as CH).
I was so surprised I asked him to confirm what I heard and he did.

4. Because IMAX theatrical mixes don』t have an LFE channel, there will be some proprietary bass management rolled into the IMAX DTS decoding.
I』m not 100% sure but it sounds like it will override the bass management settings in your AVR when locked into IMAX DTS sound codec (kind of like how THX modes would force an 80hz xover).

5. The thing that was the biggest 「wow really?」 moment ... the DTS guy made the observation that IMAX uses Audyssey for calibration of their commercial cinemas,
but with a proprietary target curve (which is a known thing).
But then he said the IMAX DTS mode would include for HOME a proprietary target curve that would override the Audyssey reference curve default.
All the other stuff above I had an inkling about but this one was a surprise.

We got to see a few more IMAX DTS demo clips than what they showed in the standard demo, and the picture quality was truly stunning with the Sony 995 running the IMAX prototype firmware.

226

主題

6231

回帖

100

積分

新手上路

五星級會員

舊站積分
3604
舊站發表文章數
5787
 樓主| 發表於 2019-1-22 11:43:07 | 顯示全部樓層
IMAX Enhanced Announces New Partners and Movie Titles

其它部分細節可參考 AVS 相關討論: https://www.avsforum.com/forum/9 ... tent-announced.html

Originally Posted by sdurani  

IMAX shows their own versions of commercial movies, which can vary from their counterparts when it comes to aspect ratio, run time, colour timing, noise reduction, sound mix, etc.
These IMAX versions of commercial movies are seen by the public for 2 or 3 weeks and then end up sitting on a shelf forever.
IMAX already got permission from the studios to show these versions theatrically; now they're getting permission to release these versions on home video.
The IMAX Enhanced program allows IMAX to monetize these dormant resources by releasing them on home video in a way that was closer to what was experienced in IMAX theatres.

One example:

IMAX soundtracks don't have a LFE channel. Each channel is high passed at 24dB per octave (4th order) at 70Hz to feed the speakers, with everything below that going to the subs.
Most consumer gear high passes at 12dB per octave (2nd order). To mimic IMAX theatrical bass management, the IMAX Enhance mode auto-switches the crossover to 70Hz;
the 4th order high pass is achieved by pre-filtering the soundtrack with a 2nd order high pass filter which, when combined with the 2nd order high pass in the crossover, results in 4th order high pass.
So IMAX Enhanced soundtracks are pre bass managed, with bass below 70Hz having been filtered out and put into a LFE channel (in this case, containing re-directed bass rather than discrete Low Frequency Effects).

Also, since IMAX theatres have tall screens, their sound format includes an upper centre speaker at the top of the screen high above the centre speaker.
Many theatrical 5.1 mixes were re-mixed to 6.0 for IMAX theatrical release to take advantage of the upper centre speaker.
The upper centre is also used for the more recent IMAX 12-channel immersive format. The home version DTS:X (and Atmos, for that matter) has a base layer and height layer of speakers, but no speaker location in between (at or near the top of the screen).
Sound from the IMAX upper centre channel is therefore encoded as an audio object on IMAX Enhanced soundtracks;
the object is tagged with coordinates above the centre speaker but mid way between the base layer and height layer.
During playback, the object is rendered using the centre speaker and front height speakers, with the sound phantom imaging at or near the top of your screen.

230

主題

912

回帖

120

積分

新手上路

三星級會員

舊站積分
645
舊站發表文章數
836
發表於 2019-2-6 19:00:54 | 顯示全部樓層
「AVC-X6500H」、「AVR-X4500H」。「SR8012」。
可升級了,不知有無SR8012 的同好 升級後 音源DTS:X 音場可選,我的升級後沒這選項 DTS;X 音源 auro-3d 不見了,看來要重設原廠了.
https://av.watch.impress.co.jp/docs/news/1168512.html

230

主題

912

回帖

120

積分

新手上路

三星級會員

舊站積分
645
舊站發表文章數
836
發表於 2019-2-8 09:47:11 | 顯示全部樓層
在別的論壇找到點起iMax dts 的方法了.
https://personalaudio.hk/2018/11 ... tm_source=post76.hk

https://post76.hk/thread-286587-1-1.html
我的player 是 UBP-X800 使用方法一,拿一條AV線當同軸.
音源 是 dts:x 非原生 imax dts,要降到dts 48khz,基本上好像繞了一條路,非原生 imax dts 可接受這樣處理應該不多吧,等於退回dvd 時代的dts(播DVD  dts HDMI 接可 imax ) .待有 原生音源再來試試.









您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-19 15:06 , Processed in 0.068858 second(s), 29 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表