新手上路
四星級會員
- 舊站積分
- 3261
- 舊站發表文章數
- 1711
|
樓主 |
發表於 2007-1-14 23:24:20
|
顯示全部樓層
原發表者是 alc
[B]
從以往在喇叭底下墊東西的經驗看來,suspension 應該跟你的問題有關。不同的墊材導致不同的聲音,喜歡豐富、飽滿 的低頻的用家,常用工業用避震橡膠當墊材,雖然這種調音方法有利有弊,但是在要求的標準不是太高的情形下,也可以用很低的代價滿足需求。
上次去 Lenny 家研究 Ikeda, 那個黑色橡膠的懸吊給我很深的印象,光是看著那兩顆大球就可以想像這個唱頭的音色必然脫不開材料本身的特性。如果它發出 Helikon 或 vdh 的聲音,那一定會讓我的下巴掉下來。
另一件我能想到的影響因素 - 唱頭本身的結構共振特性。唱頭是機械換能,跟喇叭有點像,只不過換能的方式是倒過來的。 機械換能的工具本身的機械結構就會影響到它的工作結果。用各種不同密度的木頭或金屬去做唱頭的殼跟那些根本不做殼的唱頭,肯定是兩種思維,或者說,是為了滿足或達到不同的需求。
...
所以,殼子的形狀也跟聲音的走向很有關係囉... [/B]
Suspension design and mechanical regidity could very well be the key factors.
Van der Hul in his website mentioned in a interview that he can adjust the sound of his cartridge to the taste of buyers if given that information. He mentioned that a softer suspension will cause high frequency response to rise. I guess a stiffer suspension will suppress HF and gives impression of better bass. A heavier VTF likely will compress the suspension and leads to similar effect.
Years ago I had a Philips 212 turntable and cartrdige was mounted on a plate which is then slided into the headshell slot. A salesman once told me that I would not get good bass on that TT because of the headshell design, and indeed the first thing I noticed after changing to Signet tonearm was better bass. Later I once tighten a cartridge to the headshell using the small screw driver that came with the cartridge. For a long time I adjusted everything but still could not figure out why it sounded so thin until tighten the mounting screws with large size driver. Those are lessons that any potential vibration around cartridge can suck out bass quickly, not to mention loss of resolution, etc. However, VDH warned not to overtighten the screw or you may damage the cartridge.
How about the coupling of magnetic field to the coil and the coil design like wire diameter and number of turns? |
|