忘記密碼
 立即註冊
樓主: KevinI3

針壓的設定分享

[複製鏈接]

462

主題

1萬

回帖

0

積分

新手上路

5星級會員

舊站積分
2081
舊站發表文章數
13120
發表於 2012-8-20 17:52:14 | 顯示全部樓層

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Benz Micro 設定

早期我們是使用黏土,後來發現他會破壞聲音的清晰度,所以現在都是使用__紙,
缺點是風一吹就不見了[]
Carmans audio [COLOR=deeppink]0932-377626.黃先生 新竹市光復路2段882號6F[/COLOR]

68

主題

5032

回帖

0

積分

新手上路

四星級會員

舊站積分
7167
舊站發表文章數
1821
發表於 2012-8-20 18:01:02 | 顯示全部樓層

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Benz Micro 設定

原發表者是 scs
[B]

我玩lp是拿數位訊源當參考的這樣調整比較不會有偏差,我家得數位訊源轉盤跟DAC都是DIY的,不過還有點水準至少跟高價廠機PK還OK,軟體可能的的話同一錄音cd跟LP都買起來最好,LP本來就是玩差不多的,針壓差不多,超距差不多,補償角方位角也差不多,針桿針頭人工裝的,天曉的誤差多少,誤差五度肉眼看的出來一度的話我這個近視老花兼散光鐵定是看不出來,再加上支點臂從外唱到內不管怎麼設定都有distortion所以調來調去到最後只好用聽的,聽的出來就多調一點聽不出來就隨便,排插跟壁插都有差不過差最多的還是針尖接觸溝槽那個點.............[|)] [|)] [|)] [|)] [/B]


差不多先生!![] []

為了怕亂調一通    + -剛好相抵

每次調   一定要調奇數個變數    才可聽出不同!!!![]

68

主題

5032

回帖

0

積分

新手上路

四星級會員

舊站積分
7167
舊站發表文章數
1821
發表於 2012-8-20 18:03:37 | 顯示全部樓層

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Benz Micro 設定

原發表者是 rendzaw
[B]早期我們是使用黏土,後來發現他會破壞聲音的清晰度,所以現在都是使用__紙,
缺點是風一吹就不見了[] [/B]


應該試一下彩色紙帶

像膠帶 一邊可黏   但是紙質

搞不好  兩全!!

263

主題

4488

回帖

110

積分

新手上路

五星級會員

舊站積分
1905
舊站發表文章數
3989
 樓主| 發表於 2012-8-20 18:23:57 | 顯示全部樓層

調整LP用的參考音樂

原發表者是 scs
[B]

我玩lp是拿數位訊源當參考的這樣調整比較不會有偏差,我家得數位訊源轉盤跟DAC都是DIY的,不過還有點水準至少跟高價廠機PK還OK,軟體可能的的話同一錄音cd跟LP都買起來最好,LP本來就是玩差不多的,針壓差不多,超距差不多,補償角方位角也差不多,針桿針頭人工裝的,天曉的誤差多少,誤差五度肉眼看的出來一度的話我這個近視老花兼散光鐵定是看不出來,再加上支點臂從外唱到內不管怎麼設定都有distortion所以調來調去到最後只好用聽的,聽的出來就多調一點聽不出來就隨便,排插跟壁插都有差不過差最多的還是針尖接觸溝槽那個點.............[|)] [|)] [|)] [|)] [/B]


SCS兄提到用同一錄音的CD及LP來當做調整的參考可否舉個例子
My LP system Turntable: roksan xerxes 20 plus Tonearm: Roksan Artemiz Cartridge: BenzMicro LPS Alive, Emotional,Dynamic and Passionate

263

主題

4488

回帖

110

積分

新手上路

五星級會員

舊站積分
1905
舊站發表文章數
3989
 樓主| 發表於 2012-8-20 18:29:50 | 顯示全部樓層

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Benz Micro 設定

原發表者是 rendzaw
[B]早期我們是使用黏土,後來發現他會破壞聲音的清晰度,所以現在都是使用__紙,
缺點是風一吹就不見了[] [/B]


我自己也試過幾種不同的材質
舉先前的例子,其實只要有放東西都會影響聲音
而且同樣的東西放在不同的地方也都會有不同的影響,在針壓差距0.01以內影響的趨勢沒有太大的變化

我自己是有試過放在唱頭蓋上、唱臂上甚至不影響針壓的唱臂軸心支點上(這個要放重一點大概0.5克左右)
都會對聲音有影響
但為了美觀 (我是外貌協會的),最後都拿掉了
My LP system Turntable: roksan xerxes 20 plus Tonearm: Roksan Artemiz Cartridge: BenzMicro LPS Alive, Emotional,Dynamic and Passionate

263

主題

4488

回帖

110

積分

新手上路

五星級會員

舊站積分
1905
舊站發表文章數
3989
 樓主| 發表於 2012-8-20 18:47:52 | 顯示全部樓層

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Benz Micro 設定

原發表者是 hojuiyang111
[B]

小弟的體會也是如此,

調得更好,唱片買得更多.

不過問題多半不是口袋深度不足,

而是存放空間不足. [/B]


這倒是
最近我自己又有計畫 "硬盤+氣浮臂"
氣浮臂已經像好~我是個愛用國貨的人[}]
硬盤還在物色中

但以上還在幻想階段~[]

唱頭已經在防潮箱裡了[]
My LP system Turntable: roksan xerxes 20 plus Tonearm: Roksan Artemiz Cartridge: BenzMicro LPS Alive, Emotional,Dynamic and Passionate

26

主題

2萬

回帖

250

積分

新手上路

五星級會員

舊站積分
30892
舊站發表文章數
7042
發表於 2012-8-20 19:27:12 | 顯示全部樓層

Re: 調整LP用的參考音樂

原發表者是 KevinI3
[B]

SCS兄提到用同一錄音的CD及LP來當做調整的參考可否舉個例子 [/B]


   我大概有20幾張cd跟LP都有發行的軟體.最好是發行時間接近的,如Esther,amanda............發行年代差很遠也OK

  

18

主題

1364

回帖

0

積分

新手上路

四星級會員

舊站積分
3004
舊站發表文章數
1387
發表於 2012-8-21 00:32:34 | 顯示全部樓層

Re: Re: Re: Re: Re: Re: Re: Re: Re: Benz Micro 設定

原發表者是 scs
[B]

  針壓降低唱臂也要跟著降低,不過只降不到0.5就感覺會刺耳原先設定可能沒到位,我的經驗是調整得當針壓低一點高頻應該更順耳,這點小提琴高把位最明顯.............[|)] [|)] [|)] [/B]


針壓偏低比偏高對唱片會造成更大的磨損.  

這個觀念以往在燒友間多不存在. 也不接受.  導致一堆珍貴的唱片損壞仍不知道原因.

Google 一下不難找到這一方面的資訊.  下面這一段話是個例子:

too little tracking force can allow the stylus to mis-track (bounce around in the groove) and cause instant, irreparable damage

再看下一段話:

The effect on wear to the LP by the stylus is a function of tip size and shape, tracking weight, azimuth and zenith mismatch AND stylus condition.

In my (I must admit) limited experience I have found that:

1. A "heavy weight" cart with a brand new stylus will cause much less damage than an eliptical, low VTF stylus that is broken or worn out.

2. Playing LPs on a TT that lacks antiskating will eventually wear out the two channels non-uniformly.

3. Tracking with inadequate VTF is worse than with a higher force. For example, if a cart specifies 1.5g +0.5 -0.25g, then tracking with 1g is worse than tracking with 1.75g, both in terms of wear and in terms of sound.

再看:

if you are tracking light, and you hear distortion you have already done damge to the record. Tracking a cartridge slightly higher than the middle of the range is typically the way to avoid damaging your records.

26

主題

2萬

回帖

250

積分

新手上路

五星級會員

舊站積分
30892
舊站發表文章數
7042
發表於 2012-8-21 01:07:01 | 顯示全部樓層

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Benz Micro 設定

原發表者是 Tympani99
[B]

針壓偏低比偏高對唱片會造成更大的磨損.  

這個觀念以往在燒友間多不存在. 也不接受.  導致一堆珍貴的唱片損壞仍不知道原因.

Google 一下不難找到這一方面的資訊.  下面這一段話是個例子:

too little tracking force can allow the stylus to mis-track (bounce around in the groove) and cause instant, irreparable damage

再看下一段話:

The effect on wear to the LP by the stylus is a function of tip size and shape, tracking weight, azimuth and zenith mismatch AND stylus condition.

In my (I must admit) limited experience I have found that:

1. A "heavy weight" cart with a brand new stylus will cause much less damage than an eliptical, low VTF stylus that is broken or worn out.

2. Playing LPs on a TT that lacks antiskating will eventually wear out the two channels non-uniformly.

3. Tracking with inadequate VTF is worse than with a higher force. For example, if a cart specifies 1.5g +0.5 -0.25g, then tracking with 1g is worse than tracking with 1.75g, both in terms of wear and in terms of sound.

再看:

if you are tracking light, and you hear distortion you have already done damge to the record. Tracking a cartridge slightly higher than the middle of the range is typically the way to avoid damaging your records. [/B]


  不好意思這些以前都討論過了,唱低針壓當然要把唱臂調低調無可調就要加有角度的墊片,調整良好循軌良好當然是重的針壓對音軌壓力比較大,如果跳針也是較重的針壓對唱片跟針桿阻尼壓力大,簡單的物理一點都不複雜..............
[;)] [;)] [;)]

67

主題

1萬

回帖

0

積分

新手上路

Witch Fly on the Tonearm

舊站積分
7022
舊站發表文章數
12209
發表於 2012-8-21 09:12:09 | 顯示全部樓層

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Benz Micro 設定

原發表者是 scs
[B]

  不好意思這些以前都討論過了,唱低針壓當然要把唱臂調低調無可調就要加有角度的墊片,調整良好循軌良好當然是重的針壓對音軌壓力比較大,如果跳針也是較重的針壓對唱片跟針桿阻尼壓力大,簡單的物理一點都不複雜..............
[;)] [;)] [;)] [/B]


個人是偏好較低的針壓  特別是單點臂

細節比較多

至於偏低針壓是否會折損阻尼 應該不至於

唱針損壞因素很多 生手較易發生

一般唱針使用得當 超過10年的很多

[]
站在巨人的肩膀上 我們看得更遠
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-20 04:35 , Processed in 0.140316 second(s), 41 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表