新手上路
四星級會員
- 舊站積分
- 2320
- 舊站發表文章數
- 1545
|
發表於 2006-12-7 17:27:55
|
顯示全部樓層
原發表者是 jcc104
[B]
Chris兄:
您是否在思考下列問題 ??
沒有 "專利磁迴技術"的唱臂 如何克服此問題???
Quoted from Graham
"Once Neutral Balance is chosen for use in a unipivot tonearm, one must remember that both the vertical and lateral planes will be affected the same way; without proper lateral stability, such a design would not have consistenent, proper vertical alignment, and the pivot would tend to flop over to one side or another (usually in the direction of the weighted cartridge offset angle mounting) and stay in the position it happened to find itself. Obviously this condition must be avoided. In achieving Neutral Balance for vertical pivoting motion of the Phantom, a means was needed that would provide strong lateral stabilization, while not adversely affecting Neutral Balance in any way. " [/B]
雖沒jcc兄過人的智慧與實驗經神但我有嘗試思考,但還是與其他人一樣充滿一堆問號!
再仔細看一次phantom的介紹,不論設計,似乎是達到完美的一隻唱臂!真想就直接花USD 3900買來用,省下享受音樂的寶貴時間及進瘋人院的機會!
較多年前,大部分的人包括世界各地的評論家似很喜歡將Graham與5號臂作比較與評論,雖各有擁者但一般得到的評論總是Graham細節較多高頻較延伸,SME V則低頻較多與延伸…..等,但隨著知識開放與新技術改良,各方面的搭配,百家爭鳴讓人無所適從也!對有牛頓精神的人有時何仿輕鬆一下撥一半以上的時間與作曲家或演奏家由音符來作一些心靈的溝通,想想除了常拿來測試用的那幾張唱片外,好多站衛兵好幾年的唱片不知有多渴望你來研究他.
我對Graham Phantom看到的一些重點及膚淺的看法如下:
1.Neutral Balance的設計對」unipivot arm」似乎是降低了慣性作用.
2.理想的唱臂在vertical及lateral的共振頻率最好是一樣,(共振頻率是跟arm的effective mass有關)但很不幸似乎找不到這種arm,以fixed bearing設計的arm來說vertical 及lateral的共振頻率會比較接近是因為支點的關係,單點的設計下vertical 及lateral的共振頻率差異較大,以Graham 2.2來說也許是 stable balance的關係還是無法逃離這種特性,看過國外的實驗除了 vertical 及lateral的共振頻率外」可能」還多一個 rotational 共振頻率,我想這跟水平轉動的」穩定性」有關係,Phantom的專利磁迴技術研發兩年,不是我有能力解釋的.也許因此無所謂額外的 rotational 共振而也取得fixed bearing arm 的優點,甚或達到vertical 及lateral的共振相同.
3.unipivot arm對整個臂管effective mass的平均分配影響很大,phantom對臂管加強了damping是降低共振頻率,或許可以思考改變你2.2 arm wand的damping以及 pivot damping oil…. 等等.
最後大家都跟我一樣期待你2.2變Phantom的分享[ ] |
|