新手上路
三星級會員
- 舊站積分
- 3
- 舊站發表文章數
- 670
|
發表於 2002-9-15 02:24:22
|
顯示全部樓層
This form of display gives us a moving image very close to the original film. It has a tendency to "judder" a bit though, as every other film frame lasts 1/60 of a second longer than the previous one. Even our little synthesis of the final product, which actually contains 10 pieces, shows this judder. In the future, both the player and the display could increase their display rate above 60 fields per second, to 72 per second. At that point, the fields would only last 1/72 of a second, permitting the player to show every film frame three times (24 x 3 = 72), eliminating the motion judder, and also helping us with the Flicker Fusion Frequency problem (60 flashes per second are just barely enough in a well lit viewing environment). This would look like: 1, 1, 1, 2, 2, 2, 3, 3, 3, 4, 4, 4 and so on. 72 fps will only work with film based sources though, as it is a multiple of 24. It will not work well with video sources which are 60 field per second.
這篇文章看來有理, 但有一些疑點是我這個很少用PC 放 DVD 的人要提出的.:
1. 72HZ 的對比會比60HZ 低, 畫質會好嗎?
2. PC 的 GRAPHIC 訊號, 基本上都是 NON-INTERLACED 的, DVD 軟體 OVERLAY 一塊 FRAME BUFFER 來撥放, 所以要先將 INTERLACED 的 MPEG2 SOURCE 轉為 PROGRESSIVE, 此時可以選BOB 或 WAVE 或 BY FLAG 來作 DE-INTERLACE, 然後才丟到 FRAME BUFFER 去, DVD AP 每 1/60 秒丟一次, 若 GPU 為 60HZ, 那就會 1:1 顯示, 但設為 72HZ, GPU 就會將未 REFRESH 的 FRAME 重丟, 所以, 搞到最後, 該解決FILM SOURCE 問題的步驟還是沒解決, 我是沒興趣去試, 因為我認為沒用. 還有可能造成 FIELD 重合不良的問題. |
|