新手上路
二星級會員
- 舊站積分
- 1
- 舊站發表文章數
- 438
|
發表於 2004-5-11 11:19:48
|
顯示全部樓層
The signal read-out surface is the reverse side of the printed label side.
While the compact disc is much more resistant to scratches and dirt than a conventional record,it is best to be careful not to scratch the signal surface and to keep it clean --- free of dust,dirt and fingerprints.
If the signal surface becomes dirty,clean it in one of the following ways:
1)Fingerprints --- Lightly rub the surface with a soft cloth.
2)Dust or Dirt --- Blow lightly on the disc and wipe the dirty part with a soft cloth,or clean the dirty part with a damp,soft cloth and then wipe dry.
3)Grease or Oil --- Clean with a soft cloth dampened with ethyl alcohol,then wipe dry.
Please note that conventional sprays and liquids used to clean rocords may damage the surface of the disc. Use of such cleaner is not recommended.
Also,please do not expose the disc to direct sunlight,heat or humidity for a prolonged period of time. |
|