新手上路
加拿大 音響專賣店
- 舊站積分
- 13
- 舊站發表文章數
- 291
|
樓主 |
發表於 2003-11-4 06:42:42
|
顯示全部樓層
對的 M&K 喇叭太有興趣 乾脆直接問M&K 的工程師
有關 M&K subwoofer:
*******
All I can say after MY being in audio for some 40 years is that the M&K's (in general) are superb precision near field monitors, with extremely flat and accurate frequency AND phase response.
They are as UN-hyped as can be. If the mix is good, you will hear it: and if the mix is bad, you will hear it, too.
Remember that everything we make is a sealed box which is INTENDED to be used with an 80 Hz crossover (bass management) system where both the sub AND satellite are sealed boxes; this makes the response out in space where the wavefronts are summing flat in both the frequency and phase domain, which is the ONLY way to have an invisible seamless transition between the so-called satellites and sub.
If this is properly set up, you will experience what SEEMS like even response from all the satellites (everywhere in the room), so that if, say, a stand-up jazz bass is in the Left channel, it will sound like the bass is coming from there, even if the sub just happens to be to the right and behind you. (for example)
Therefore, if you already have speakers which are ported, or expect to use ANY speaker below 80 Hz and integrate the sub with that system, you MIGHT be in for a big disappointment --- it will be difficult to couple the sub properly in the phase domain (especially) because the phase of the wave coming out of the ports is not the same as the phase coming out of the cone open area of your existing speakers. One exception is if the port is in the back: then the speakers may be placed such that the back wave, by the time it bounces off the wall behind it and comes around to the front, is now IN phase with the front wave coming off the cone area.
Also, different preamps have VERY different methods for the so-called speaker distance setups. Some of these circuits are great and some are questionable. Some may be used as a phase shift method when all else fails --- it depends upon how they do the bass pickoff in the bass management system. This is a complex issue, though, well outside the range of just one email. |
|