新手上路
四星級會員
- 舊站積分
- 567
- 舊站發表文章數
- 1892
|
發表於 2004-7-1 16:29:20
|
顯示全部樓層
實在忍不住
原發表者是 asrc
[B]
Ted Jordan Goodmans Axiette 設計者 要大家把喇叭鑲在牆上聽. 大家怎都背叛祖師爺? 原廠建議用反射式音箱大家也背道而馳?
http://www.tnt-audio.com/intervis/jordan_e.html
""The polar response favoured by convention is quite unsatisfactory. My approach provides a directional and gently rising high frequency response with the loudspeakers placed with their axes crossing well in front of the listener. It is also strongly recommended (again, against all convention) that loudspeakers be placed as close to a wall as possible.
The simple reason for this is that wall reflections will create two further 'virtual' loudspeakers that will create severe interference and impair spatiality. (The ideal, if impractical solution is to mount the drivers in the wall). "" [/B]
這段話前面:
***Natural sound, from a soloist to a full-scale orchestra has an immensely complex harmonic structure, the lifelike reproduction of which demands a loudspeaker capable of a very precise response to detail particularly at low levels.
Since every electronic, mechanical or acoustical component in reproduction chain will, regardless of purpose, degrade fine detail, the fewer components between the amplifier terminals and the listening room, the better.
This includes conventional "mid-kilohertz" crossovers, which, in addition, destroy the natural integrity of the harmonic structure by the abrupt severance of the harmonics from the fundamental frequencies.
These problems are avoided with the single cone moving coil driver which is to loudspeakers as the wheel is to the car, ?Simple, effective and with no viable alternatives.***
同篇訪談的下一段話
***TNT-Audio >
Speaking of crossovers, we have a vast choice of "mainstreams those who swear a 6 dB/Oct. is the only crossover worth for hi-fi applications, those who prefer no crossovers at all (sacrificing the lower end of the spectrum, for example) and finally those who swear by complicated and complex networks.
Your opinion on this "hot" topic?
EJJ >
The ideal in terms of detail resolution and phase integrity is of course no crossover at all. However in order to re-produce the extreme low end then a crossover is a necessary evil.
However, by adhering to the first order concept and keeping the crossover frequency as low as possible, avoids any problems in that so very critical mid-high frequency band.
Networks that are more complex may be used to achieve a theoretically ideal modelling i.e. on paper measures well but in reality can seriously denigrate the sound quality***
這種斷章取義的做法看多了 我看你在這裡的引述做法大致都如此
還有 引用來證明你的看法的論述要嚴謹一點 Audio Asylum 之類的討論區文章跟這兒吵吵鬧鬧的東西是一樣的 不會因為它是用英文就比較有公信力
要證明你的東西更優秀 也不是某人人的太太說如何算數
別假設玩全音域單體的人都不看書 你這種驕傲 鬧場的態度實在令人討厭 [ !]
Bulldog兄就是好意而已 礙著了你什麼了??? 要炫你的知識 那就開個新主題 把你要炫的post上去 接受挑戰 別在這裡賣弄! |
|