新手上路
資深電聲研發工桯師
- 舊站積分
- 33
- 舊站發表文章數
- 67
|
發表於 2008-6-2 11:37:24
|
顯示全部樓層
The industrial standards to measure the T60 is ISO3382
EDT The EDT parameter (Early Decay Time) is the reverberation time, measured over the first 10 dB of the decay. This gives a more subjective evaluation of the reverberation time. It is expressed in ms.
RT20 is the reverberation time of the room (the time required for a sound decaying of 60 dB) evaluated over a 20 dB decay range in the Schroeder Plot (from -5 to -25 dB), using linear regression techniques. It is the time distance between the -5 dB and the -25 dB points of the Schroeder Plot, multiplied by 3.
RT30 is the reverberation time of the room evaluated over a 30 dB decay range (from -5 to -35 dB), using linear regression techniques.
Problems with T60 is that:
1) Importance of the early part of the impulse response is not addressed.
2) In practice a decay curve is seldom a straight line with a constant decay rate. The curve may be bent and have different decay rate at different time (e.g. if the decay consists of many exponential decaying modes with different damping as suggested by the wave theory).
3) Although RT is defined over a 60dB decay, a listener can hardy be expected to be able to listen to levels of -35dB in continuous speech or music. Modern day measurements of RT use the decay from -5dB to -35dB and use linear regression to determine the decay rate and then extrapolate to obtain RT over -60dB
Atal et al [Proc. of the 5th ICA, Liége 1965, G32] have shown that the initial slope (first 160ms) of a non-exponentially decay is the most significant for the subjectively perceived reverberance', and for the determination of an equivalent T60.
Jordan [JASA 47, 1970, p.408] proposed a measure, the Early Decay Time (EDT), to characterise the rate of sound decay in its initial portion. EDT is the time in which the first 10dB fall of a decay process occurs, multiplied by a factor of 6 to give an equivalent -60dB. |
|