新手上路
Witch Fly on the Tonearm
- 舊站積分
- 7022
- 舊站發表文章數
- 12209
|
樓主 |
發表於 2009-6-23 09:13:08
|
顯示全部樓層
-- At this point, a brief description of Balance Theory may be helpful: There are basically three types of static balance systems, Neutral, Stable, and Unstable. Stable balance, normally seen in laboratory scales, occurs when the CG (center of gravity) of the moving system is placed BELOW the pivot point. When this type of system is displaced from its preferred rest position, it will generate an immediate and opposing force which tries to return to that same position.
The third, and most desirable system for tonearms, is Neutral Balance. With this system, the pivot point and the CG of the moving system are in the same plane. When the arm is raised or lowered, there is no opposing force trying to return the arm to a rest position; the pivoting system doesn't really know or care if the stylus is at the record surface level or a half-inch above or below it; as a result, there is no opposing force to the arm as it is traversing record deflection during play. The only downward tracking force is that of the adjustable counterweight, which remains a constant. –
Previously, all true unipivots - that is, those with a single contact point for the bearing and NO secondary stablizing surfaces, bearings, etc. - required the use of side weights or a significantly lowered counterweight in order to provide stability. (And even those with a secondary stabilizing guide generally require a lowered center of gravity in order to provide constant contact with the stabilizer guide piece).
The drawback to both these conditions is that this design becomes a Stable Balance system, which is normally used, as mentioned, in laboratory scales for precision weight measurements. But laboratory scales have very different requirements than a tonearm. If Stable Balance is applied to tonearms, the arm will have a preferred rest position and always tries to return to this point; any change in tonearm height, as in tracking warped records, causes an immediate and equally opposing force that tries to push the arm back to its rest position. The higher the warp, the more counter-force is applied.
http://www.graham-engineering.com/_wsn/page2.html
[ ] |
|