新手上路
燒膠級會員
- 舊站積分
- 9685
- 舊站發表文章數
- 21982
|
樓主 |
發表於 2015-3-2 11:11:07
|
顯示全部樓層
Re: ortofon 對anti-skating adjustment 的說法
原發表者是 hojuiyang111
[B]Correct bias or anti-skating adjustment is important in order to achieveoptimal tracking ability and thereby minimum record wear and distortion[/COLOR] . A number of players have a device which, related to the tracking force, will give an anti-clockwise force needed to the tonearm. Correct bias has to compensate for the inwards directed torque on the tonearm caused by the friction between stylus and groove. But this again is influenced by stylus type and amplitudes in the record[/COLOR] .
A simple recommendation for a rather precise bias: if you hear distortion in say right channel when using recommended tracking force, increase the biasscale and vice versa. This is for normal cartridge use. But when working like the DJ´s, where the record is turned forwards and backwards, bias has to be reduced otherwise stylus will easily jump in the groove.
ortofon [/B]
What is anti-skating, and how should it be set?
Anti-skating is an adjustment designed to counteract the force generated as the stylus is drawn towards the spindle. For DJ use, anti-skating should be set to 『0』, due to the necessity of backcueing. Setting anti-skating at 『0』 allows the stylus to follow the groove adequately, regardless of what direction the record is moving. For playback and/or transcription use (as with the Ortofon Arkiv cartridge), the anti-skating value should approximately match the tracking weight applied to the cartridge[/COLOR] .
Note: Some DJs, despite doing backcueing and/or scratching, prefer to set the anti-skating at ½ the value of the tracking weight. This is a personal preference, and should be experimented to your particular liking. |
|