新手上路
二星級會員
- 舊站積分
- 31
- 舊站發表文章數
- 191
|
發表於 2010-2-23 10:22:39
|
顯示全部樓層
Re: 288L
原發表者是 lujo
[B] [/B]
In a conventional full range compression driver the phase plug must be located extremely close to the diaphragm, excursion of the diaphragm is limited and middle frequency perfomance is compromised. A typical 2" dome compression driver has a limited high frequency response. Above 8 kHz the dome diaphragm breaks up causing resonance and harsh metallic sound.
這是一般288 Full Range driver 的問題所在..7k 以上效率就差很多了..
Altec 最後開發了Tangerine Phasing 來決解這個問題,,GOTO及AL也發現這一問題..也從不生產Full Range (500hz-15K)的Driver..
這是GOTO 3音Here are some correction based on GOTO and my experience for a 3 way system.
The SG505TT with S150 horn should only cover from 200Hz up to 1kHz - that is recommended by Mr. GOTO. To use SG505TT in a 3 way system, one should follw that advice or choose to use different horn. If choose S200 horn, the crossover can be 270Hz to 11000Hz ~1500 Hz. If choose S300 horn, the crossover can be 400Hz to 3000Hz. If user want to cover up to 5000 Hz, the SG570 + S300 horn combo is better. The best of such application is SG5880S + S300 horn to covr 400Hz to 5kHz. This way, the GOTO tweeter can cover 5kHz and up.
Here is another type of application for a 3 way system, same woofer of choose but SG505TT + S200 to cover 270Hz to 1kHz and SG370DX +S600 horn to cover 1kHz and up. The SG370DX can cover up to 18kHz and using it with 1kHz high pass filter. This will give the best low-mid range performance and still have good 1kHz to 5kHz range and also keep the tweeter range(5kHz up) acceptable.
Of course, the best is GOTO SG38WNS(200Hz down) + SG505TT and S150 horn(200Hz to 1kHz) + SG370DX and S600 horn(1kHz up). For space concerned user, S200 or S300 hron can be use by need to up shift the crossover to 270Hz or 400Hz.
路的設定 |
|