新手上路
四星級會員
- 舊站積分
- 4581
- 舊站發表文章數
- 2498
|
發表於 2009-1-12 08:43:30
|
顯示全部樓層
感謝 Vader兄.............
原發表者是 Vader
[B]
依據原廠manu:
Unless ordered otherwise, switch settings are factory set as follows:
Phone: 60dB,1KΩ input impedance
Balanced Line Input: 6dB gain,1MΩ input impedance(+)
Consult the diagrams on pages A1 and A2 for proper settings of switches located inside the Encore 1MΩ Preamplifier.
Page A1:
BALANCE LINE INPUT (ONE CHANNEL)
SW3:
1 on , 2 off (+)input impedance :10 KΩ; Gain: 0 dB, (-)input impedance :10 KΩ
1 off , 2 off (+)input impedance :1MΩ; Gain:7 dB, (-)input impedance :10 KΩ
1 on , 2 on (+)input impedance :10 KΩ; Gain:+12 dB, (-)input impedance :1 KΩ
1 off , 2 on (+)input impedance :1MΩ; Gain:+18 dB, (-)input impedance :1 KΩ
Note:
For unbalanced sources set switches 1 & 2 to off.
For balanced sources set switches 1 on & 2 off.
Page A2:
PHONE(ONE CHANNEL)
SW1:
1 off , 2 off Gain: 36 dB,
1 on , 2 off Gain: 47 dB,
1 on , 2 on Gain: 60 dB,
SW2:
1 off , 2 off 50K/220pf,
1 on , 2 off 10K/220pf,
1 off , 2 on 1K/0.01uf,
以上為 CELLO 原廠 Manual 關於內部switches的設定資料,請參考。
又請問各位先進,STRADIVARI Premiere喇叭背板上有兩個類似反射孔但又用蓋子遮蓋卻又可以轉動的裝置是甚麼?有何作用?需要作調整嗎?同序列的大哥二哥是否也有相同或類似得設計?先謝了!! [/B] |
|