新手上路
一星級會員
- 舊站積分
- 4
- 舊站發表文章數
- 72
|
發表於 2005-11-6 09:38:13
|
顯示全部樓層
原發表者是 j4339
[B]新版本firmware到底改了那些缺點?
加強了那些?
setup的畫面,為何沒有繁體中文?只有簡體!
和已經支援繁體中文的 字幕srt嗎? [/B]
新版本改良細節請參考
http://www.oppodigital.com/opdv9 ... 2_release_note.html
這一版新的韌體是從好幾個月前就開始研發的,還是以功能/畫質的改良居多。MENU的畫面轉到繁體可能還要一些時間。繁體的SRT支援也是。這些都是在最近才由碧卡向OPPO提出來的。
另外,j4339兄,您的YAHOO信箱有問題喔,昨天早上寄給您有關換線的回覆一直被退回。我們星期一上班後會再以電話跟您聯絡。
歸納一下,本版的功能共有
1. Support 2:2 cadence for PAL movies (支援PAL 規格電影2:2 cadence)
In the 「General Setup」 menu page, there is now a 「Video Mode」 option. The choices are 「Video 1」 and 「Video 2」. The 「Video 1」 mode is the same as the previous version firmware, which does not support 2:2 cadence for PAL movies. The 「Video 2」 mode supports 2:2 cadence for PAL movies. However in 「Video 2」 mode all analog video outputs (Composite, S-Video, Component) will not perform NTSC/PAL system conversion. The video output from any of the analog connectors will have the same NTSC or PAL system as encoded on the DVD disc itself.
In summary:
If you mainly watch North American NTSC versions of movies and video programs on DVD, and would like to keep the NTSC/PAL system conversion function on the analog video outputs, you should select the 「Video 1」 mode. In this case imported PAL discs with 2:2 cadence will still play, but not with the best possible picture quality.
If you only use the DVI video output and would like to get the best possible picture quality for both NTSC and PAL discs, you should select the 「Video 2」 mode. In this case the analog video outputs will not perform NTSC/PAL system conversion.
2. Enhance aspect ratio for DivX contents (加強並改正DivX 畫面比例的支援)
The player no longer stretches DivX contents to fill up the entire screen. Instead, the player maintains proper aspect ratio of the picture, provided that the DivX content is encoded with correct aspect ratio and the 「TV Display」 setting in the 「General Setup Page」 of the DVD player is correct.
3. Enhance support for DVD+R Dual Layer discs (加強對DVD+R雙層片的支援)
The player has better support for DVD+R Dual Layer discs. However the playability of self-recorded discs may vary depending on media and formatting software types.
4. Fix for the problem of turning off DCDi when 「TrueLife」 is turned off (改正"TrueLife"功能關掉時DCDi 也被關掉的問題)
In the previous version firmware, when the 「TrueLife」 option is turned off from the 「Video Setup」 menu page, the DCDi function is turned off at the same time. This version fixes the problem. When 「TrueLife」 is turned off, it does not accidentally turn off DCDi at the same time.
5. Add noise reduction function (增加降低雜訊功能)
The 「Video Setup Page」 now has a 「Noise Reduction」 option. The selections are 「Off」, 「Low」, 「Medium」, and 「High」. When this option is turned on, the DVD player enables the Motion Adaptive Noise Reduction function provided by its Genesis/Faroudja video processing chip to reduce the video noise. This function is most useful for DVD programs that are mastered from broadcast video sources, such as TV series. It can help reducing the 「mosquito noise」 and make the picture smoother and cleaner. For DVD programs that are mastered from film sources, such as most movie titles, this noise reduction function is normally not necessary.
Although best noise reduction result can be achieved by setting the noise reduction option to 「High」, this setting may cause fast changing scenes to become blur or to leave ghosting traces. It is recommended that the option be set to 「Off」 normally. Use the 「Low」 or 「Medium」 selection when noise reduction is necessary.
6. Support frame-by-frame reverse and forward (支援逐格畫面前進和反轉)
When playing a movie, press the 「PAUSE」 key to pause the playback. At this time the 「REV」 and 「FWD」 keys can be used to reverse and forward the video frame-by-frame.
7. Maintain proper aspect ratio when zooming (畫面放大時比例維持不變)
In all zooming levels the proper aspect ratio of the video content is maintained, provided that the 「TV Display」 setting in the 「General Setup Page」 matches the actual display device and video contents.
8. Support DVD-Video or DTS/Dolby tracks on a DVD-Audio disc (支援DVD-Video 或 DVD-Audio 的 DTS/Dolby 音軌)
In the 「General Setup」 menu page, there is now a 「DVD-Audio Mode」 option. The choices are 「DVD Audio」 and 「DVD Video」. When set to 「DVD Audio」, the player will play the DVD-Audio tracks of a DVD-Audio disc. When set to 「DVD Video」, the player will play the DVD-Video or DTS/Dolby tracks of a DVD-Audio disc. This option does not affect DVD-Video discs so that even when it』s set to 「DVD-Audio」, DVD-Video discs will play correctly.
The 「DVD Play Mode」 option can only be set when the tray is ejected or when there is no disc in the player.
9. Memory function to resume playing a movie from where it was left off (記憶碟片上次停止觀看時的功能--請看以下操作說明)
This function works for DVD-Video discs only. To use the function, press the 「EJECT」 button on the remote. The player will show 「Saving Breakpoint…」 on screen and eject the disc tray. You can then turn off the DVD player using the 「POWER」 button on the remote. The tray will retract and the player will turn off. Next time when you turn on the DVD player, it will prompt 「SELECT Key: Jump to the breakpoint; other key: Play from beginning」. At this point you can press the 「SELECT」 key to resume playback from the saved breakpoint. If you press any other key or do not press a key, playback will start from the beginning.
The memory function can remember 1 breakpoint only. Any new 「EJECT」 operation will overwrite the previous breakpoint with a new one.
10. Random/Shuffle for audio CD (播放 Audio CD 時的Random/Shuffle功能)
While playing an audio CD, pressing the 「ANGLE」 key will cycle the play mode through 「Shuffle」, 「Random」, and 「Normal」 options. In 「Shuffle」 mode the player will play all tracks on the CD in random order, with no repetition and then stop when each track is played once. In 「Random」 mode it will play tracks in true random order, so there might be repeated play of a track, and playback does not stop until the user stops it.
This function supports audio CD only.
11. Extended display time for DVI resolution (延長切換 DVI解析度顯示的時間)
When the 「DVI」 button is pressed to change the DVI resolution, the on-screen display shows the DVI resolution. Some display devices take a longer time to adjust to the new DVI resolution, so extending the time that the resolution is displayed on the screen gives users of such display device an opportunity to see what the selected DVI resolution is.
12. Firmware version number display (可顯示韌體版本)
With the disc tray ejected, pressing the 「OSD」 button on the remote will show the firmware version on the video screen.
13. Support DivX Digital Right Management (DRM) and Video on Demand (VOD) (支援DivX Digital Right Management (DRM) 和 Video on Demand (VOD))
It is possible to play AES encrypted DivX contents that you may either purchase or rent from content providers. For more information about the DivX DRM and VOD, please visit www.divx.com/vod.
14. Increased baseline brightness level (提高預設的亮度水平)
The baseline brightness level (Brightness level when the 「Brightness」 setting in the 「Video Setup Page」 is set to 0) has been increased to calibrate the DVI output. The new baseline brightness level is equivalent of +5 brightness level in previous firmware versions.
15. New user interface font (新的使用者介面英文字型)
A new user interface font (Arial) replaces the font used in previous firmware versions to give the user a clean view of on-screen display and menu options.[/FONT] |
|